Yasen Laminating Film ID Size 65mm/70mm/80mm - 125/250 Microns 100 Sheets/Pack

•Name: Laminating Film ID Size

•Size:

•Microns: 125 Microns | 250 Microns

•Type: Laminating Film

•Pack: 100 sheets/Pack

•Brand: YASEN

•Color: Transparent

•Materials: PET (Polyethylene Terephthalate)

•Texture: Glossy

•ID Cards & Passes

•Important Documents & Certificates

•Vibrant Photos & Artwork

•Menu Cards & Signage

•Laminating film is made of a base film, such as polyester or PVC, and is then coated with an adhesive. Adhesives can be activated either by thermal heat or by high-pressure. Laminating films provide a protective covering that seals materials between two layers of plastic. This affords an all-round protective surface that is both flexible and sturdy. Laminating films can thus be employed for a wide range of uses, everything from protecting documents to creating ID cards.

•ID size Laminating films, cut out perfectly ready to use

•Enhancing the life of printed items and making it possible for them to withstand several uses

•Protecting against smudges and fingerprints, spills and stains, tears and wrinkles, marks and abrasions, as well as oil, grease, dirt, moisture, and other pollutants

•Gloss finish laminate that gives an overall clean and professional appearance that is simple to wipe clean and dust, and can provide photograph enhancement

•80 microns: 110°c

•125 microns: 140°c

•250 microns: 180°c

•Gather your materials: Choose the desired film size and thickness, select a compatible laminating machine, and prepare your documents or photos.

•Preheat the machine: Set it to the recommended temperature for your chosen film thickness (see temperature guide below).

•Assemble the film: Place your document between the two halves of the laminating pouch, with the adhesive side facing inwards.

•Laminate: Feed the pouch into the machine and let it work its magic. Do not force it.

•Check and re-run if necessary: Inspect the finished product for uneven lamination. If needed, re-insert the pouch and run it through the machine again.

•️Be sure to set the laminating machine for the required temperature of the film. Put the film on the machine properly, do not put the film inside out (the adhesive side must be facing paper)

•Do not scratch the adhesive part of the film with hard or pointed object, this will affect the end result of the lamination

•Store the film on a cool dry place, do not place directly under the sun or hot places