Size: A4 (210mm x 297mm) | Short (222mm x 286mm) | Long (222mm x 337mm) | A3 (297mm × 420 mm)
Microns: 125 Microns | 250 Microns
Type: Laminating Film
Pack: 100 sheets/Pack
Brand: YASEN
Color: Transparent
Materials: PET (Polyethylene Terephthalate)
Texture: Glossy
SUITABLE FOR
ID Cards / Passes
Signs / notices
Pictures / photographs
Teaching Aids
DESCRIPTION
Laminating film is made of a base film, such as polyester or PVC, and is then coated with an adhesive. Adhesives can be activated either by thermal heat or by high-pressure. Laminating films provide a protective covering that seals materials between two layers of plastic. This affords an all-round protective surface that is both flexible and sturdy. Laminating films can thus be employed for a wide range of uses, everything from protecting documents to creating ID cards.
PRODUCT FEATURES
•Document size Laminating films, cut out perfectly ready to use for document size prints
•Enhancing the life of printed items and making it possible for them to withstand several uses
•Protecting against smudges and fingerprints, spills and stains, tears and wrinkles, marks and abrasions, as well as oil, grease, dirt, moisture, and other pollutants
•Gloss finish laminate that gives an overall clean and professional appearance that is simple to wipe clean and dust, and can provide photograph enhancement
️Temperature guide
•80 microns: 110°c
•125 microns: 140°c
•250 microns: 180°c
HOW TO USE
•️ Prepare the Materials you want to laminate, choose a laminating machine that suits your needs.
•️ Turn on the machine, set the laminator in HOT Mode (or Temperature Dial) and allow it to warm up.
•️ Place your document (photo) in between the laminating film
•️ Feed the film (with the closed part fist) to the machine and let it do the work, do not forcefully feed it to the machine
•️ check for uneven lamination of the finished product, re-insert it again to the machine if needed.
Reminders or Disclaimer
NOTE: Be sure to use the right Laminating machine for your film (some size may not fit on each machine)
•️ Be sure to set the laminating machine for the required temperature of the film
•️ Put the film on the machine properly, do not put the film inside out (the adhesive side must be facing paper)
•️ Be sure not to laminate only one side (or open end) or else the film will stick and wrap around the rollers.
•️ Do not scratch the adhesive part of the film with hard or pointed object, this will affect the end result of the lamination