Primero Multi-Seal Elastomeric waterproof Sealant paint

APPLICATION:

Product is ready to use. No thinning is necessary. HOWEVER, you may add a maximum of 5% clean water to help smoothen brush strokes. Pre Stripe Multi Seal on corners, edges & areas with cracks. Let it dry 

Apply FIRST COAT OF Pr1mero Multi-Seal vertically. Let dry for 1 to 2 hours. Apply second coat horizontally. It is best to apply two thin coats rather than one thick coating to aid in drying of sealant. For severe cracks on walls that are non-structural, you may use Pr1mero Waterproofing Fiber Cloth immediately after the first coat while it is wet. Dab cloth with brush onto wet sealant. Smoothen the Fiber Cloth before it dries, pushing air bubbles out from fiber cloth. Let dry then apply second coat or third coat if necessary.

For Waterproofing of Roof Decks and Balconies:

Drying time will be longer in enclosed areas such as bathrooms and underground tanks. Make sure area is well- ventilated. APPLY third coat if area is subject to heavy load or if machines like air handling units, pumps or exhaust fans are near. Top at least 1-inch-thick cement topping for balconies with heavy foot traffic.