Davies Timberprime Waterbased Wood Primer - 1L (1 liter/quart)

Davies Timberprime

Water-based Wood Primer

DAVIES TimberPrime is a premium interior acrylic latex primer undercoat for use on wood surfaces. It provides optimum sealing, excellent adhesion, resistance to peeling and cracking with maximum hiding. It contains a tannin blocker to resist wood stains thus sealing and protecting bare wood surfaces such as siding, trim, sash and doors.

Type : Modified Acrylic Finish : Flat Color : White Practical Coverage: 30-35 sqm / 4L / coat depending on surface porosity Pack Sizes: 1 liter and 4 liters

FEATURES

• High hiding to cover surface imperfections • Seals fine wooden grains for a smooth finish • Blocks tannin stains eliminating topcoat discoloration • Excellent adhesion to wooden surfaces and to succeeding topcoats

RECOMMENDED USE

For wood surfaces

PAINTING INSTRUCTIONS

Application Tools : Brush / Roller / Spray

Thinning: Dilute with not more than 5% water

Surface Preparation: • All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and other foreign materials. • Sand wood surface until smooth to touch with no slivers or rough edges. Dust off and wipe with a clean rag. • Patch all holes and imperfections with DAVIES 25 PasteWoodfiller or DAVIES 77 Laxtite for a clear varnish finish. UseDAVIES 790 Speedglaze Lacquer Putty for Duco finish. Sand smooth and dust off

Painting System: Primer/Sealer: Apply one (1) coat of DAVIES 1300 TimberPrime Wood Primer Putty: As needed, apply DAVIES 5000 Megacryl Concrete Putty Primer/Sealer: Apply one (1) coat of DAVIES 1300 TimberPrime Wood Primer on puttied surface Topcoat: Apply two (2) coats of DAVIES Latex Topcoat Finish or Davies Aqua Gloss-it Finish

Recoating Interval: 2-3 hours

Drying Time: 2 hours

WARNING : This is a WATERBASED formulation .. use WATER to thin / adjust viscosity..