Ashlar Cobble, Fan Shaped and Random Stone Stamping Mould or Stampcrete re-usable mold 1000X

ASHLAR=62x62x1.5cm

EUROPEAN FAN SHAPED=112x67x1.5cm

RANDOM STONE=75x75x2.8cm

LONDON RUGGED=75x43x2CM

ROYAL ASHLAR=92.7x92.7x2 CM 6cut

GRAND ASHLAR = 91x91x2 CM 8cut

DIY, concrete stamping mould for wall claddings, pathway Maker, bricks pavers look. stone effect

Stamping mould application for concrete pathway Maker or wall maker. We can support buyer for the pigment materials and other supplies needed

Easy to set up.

1. Flattened concrete surface 2. Spreading Reinforcing material 3.Enhanced surface light collection of Reinforcing material, finely screed wet fresh concrete evenly 4.Testing surface hardness 5.Spreading filming iron oxide powder using your hand 6.Place the mold face down but before face down better apply liquid or powder release agent to prevent sticking of fresh concrete to the mold during lifting.

7.Spray or apply powder or liquid release agent also the fresh concrete before stamping.

Moulds and ramming, tamper better use rubber tamper to prevent damaged on the mold 8.Surface rinsing with water 9.Surface protection agent, concrete sealer wet look is better.

One of stamped concrete's advantages is its ease of installation. It is far less labor-intensive to install a stamped concrete surface than one made of pavers, for which each paver needs to be hauled and set.

Search also U tube for additional idea: Concrete stamping process!!!

NOTE: All your concrete stamping needs are already available here ONLINE.