Original Japan's KISHO Ceramic Coating Si-701 (30ml)

- 1 bottle Si-701 (30ml)

- 1 pc applicator pad

- 3 pcs suede cloth

- 1 pc microfiber towel

PRODUCT DESCRIPTION:

KISHO Si-701 is formulated with japan material

- Provides total protection to car paint.

- Effect can lasts up to several months even after numerous car wash

- Anti-static and water-resistant

- Prevents adhesion of dust and water on car paint

- Provides excellent protection against colour fading due to UV damage

APPLYING INSTRUCTION

Before applying coat, the following preparations should be carried out:

Paint surface treatment before vehicle glass coating is dependent on paint conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the paint surface conditions, but do note that degreasing is necessary.

Precautions before the construction

I. This product dry quickly, please avoid applying under burning sun, otherwise wiping would be impeded;

2. Not recommend applying in temperature environment under 10 C;

3. Please carry out construction under complete cool-off state of the vehicle body, since vehicle body heat may expedite product hardening rate and leading to wiping obstruction;

4.Please completely clear fouling attached on vehicle body and carry out degreasing before practice;

5. Please read practice manual in details and follow practice procedures therein.

Si-701 glass coating agent practice method

1. Drip Si-701 glass coating agent on sponge for 7-10 drops, first smear it laterally, then smear it vertically with "#" pattern, recommended at 50cm* 50cm for each applying area, and note the usage quantity, since excessive usage per time may lead to non-uniform smearing or wiping obstruction;

2. Waiting for 2-8 minutes after sponge smearing, then use a dry towel to clear surface residue whilst wiping the glass coating film with brightness. The waiting time before wiping with towel recommendation:30 C= within 3 min, 20 C=within 5 min, 10 C=within 8 min, glass coating hardening rate is directly correlated with temperature and humidity, thus it is recommended to measure local temperature and humidity before determining the waiting time