Original Japan's Kisho Si-811 Ceramic Coating (30ml)

- 1 bottle Si-811 (30ml)

- 1 pc applicator pad

- 3 pcs suede cloth

- 1 pc microfiber towel

- instruction manual

PRODUCT DESCRIPTION:

Si-811 Features

1.Protection and gloss superior to that of competitor "professional coatings" but easy to use for all detailers

2.Superior hydrophobicity

3.Easy maintenance with "self-cleaning" properties

4.Repels UV rays, water, oils, dirt, and contaminants

APPLYING INSTRUCTION

Before applying coat,the following preparations should be carried out:

Paint surface treatment before vehicle glass coating is dependent on paint conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the paint surface conditions, but do note that degreasing is necessary.

Precautions before the construction

I. This product dry quickly, please avoid applying under burning sun, otherwise wiping would be impeded;

2. Not recommend applying in temperature environment under 10 C;

3. Please carry out construction under complete cool-off state of the vehicle body, since vehicle body heat may expedite product hardening rate and leading to wiping obstruction;

4.Please completely clear fouling attached on vehicle body and carry out degreasing before practice;

5. Please read practice manual in details and follow practice procedures therein.

Si-811 glass coating agent practice method

1. Drip Si-811 glass coating agent on sponge for 7-10 drops, first smear it laterally, then smear it vertically with "#" pattern, recommended at 50cm*50cm for each applying area, and note the usage quantity, since excessive usage per time may lead to non-uniform smearing or wiping obstruction;

2. Wait 2-8 minutes to wipe after smearing, first use a wet towel to wipe with strength uniformly (no need to wipe repeatedly, just spread the glass coating agent),then immediately use a dry towel to wipe the glass coating layer, until the surface is bright and smooth. The waiting time before wiping with wet towel recommendation: 30 C=within 3 min, 20 C=within 5 min, 10 C=within 8 min, glass coating hardening rate is directly correlated with temperature and humidity, thus it is recommended to measure local temperature and humidity before determining the waiting time;

3. Check wiping omission for each part after completion, until the whole vehicle is covered;