[COD + local seller]STC-1000 STC-1000 LED Digital Temperature Controller Thermostat Thermoregulator Incubator 110-220V/AC

100% brand new and high quality

modle: STC-1000

Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.

Technical Parameters:

1.Temperature measuring range: -50 C ~ 99 C

2.Resolution: 0.1 C;

3.Accuracy:+- 1 C (-50 C ~ 70 C);

4.Sensor error delay: 1 minute

5.Power supply: AC 110-220V 50/60Hz

6.Power consumption:

7.Sensor: NTC sensor (1PC);

8.Relay contact capacity: Two Relay Cool 10A/220VAC; Heat 10A/220VAC;

9.Ambient temperature: 0 C ~ 60 C;

10.Storage temperature: -30 C ~ 75 C;

11.Relative humidity: 20% ~ 85% (No condensate)

12.Sensor length: 1.0m

13. Front Panel Size: 75x34.5mm ; Product Size: 75x34.5x85 mm ; Mounting Size: 71x29mm

Code Function Set Range Default

F1 Temperature set value -50.0~99.9C 10.0C

F2 Difference set value 0.3~10.0C 0.5C

F3 Compressor delay time 1~10 minutes 3 minutes

F4 Temperature calibration value -10.0C~10.0C 0C

Safety Regulations

Danger:

1.Strictly distinguish the sensor down-lead, power wire and output relay interface from one another, and prohibit wrong connections or overloading the relay.

2.Dangers: Prohibit connecting the wire terminals without electricity cut-off.

Warning:

Prohibit using the machine under the environment of over damp, high temp., strong electromagnetism interference or

strong corrosion.

Notice:

1.The power supply should conform to the voltage value indicated in the instruction.

2.To avoid the interference, the sensor down-lead and power wire should be kept a distance.

Package Included:

1 * Temperature Controller