About this product
Contains Dangerous Goods?No
Warranty TypeSupplier Warranty
BrandMOGEE
Product description
•Item Type: Anti Rust Paint
•Content:100g with brush / 300g with brush
•Shelf life:3 years
•Function:Rust prevention / Protection against corrosion / Clean Stains
•Storage method:Store in a cool dry place
1. Convert Existing Rust: Chassis Rust Converter replaces existing rust with a dark and protective polymer barrier. It converts rust into an inert coating that seals in moisture and prevents future rust and corrosion.
2. Protects Iron and Metal Surfaces: It restores and protects iron and metal surfaces on cars, dumpsters, equipment, railings, and more.
3. Prevents Future Corrosion: This anti-rust treatment prevents future corrosion by locking in moisture from rain and snow. Dry in 20 minutes.
4. Non-Toxic, Smoke-Free Formula: It is a non-flammable, low VOC water-based treatment. It is non-toxic and emits no harmful fumes.
5. No more scratching, sandblasting, or sanding: create a weatherproof barrier and get ready for a fresh coat of paint on your car's chassis. This chassis rust converter will provide more than double the rust protection.
1. Finishing: Remove large rust and scale particles with a wire brush or sandpaper. Thoroughly clean surfaces to remove dirt, dust and grease.
2. Application: Shake or stir well before use. Apply two coats using a brush, roller or pump spray, allowing at least 20 minutes to dry between coats. A 48-hour cure time is required before a premium paint can be applied.
3. Cleaning up: Application equipment should be cleaned immediately with soap and water.
4. General: Do not use this product if surface temperature is below 50°F. Store in a cool, dry place protected from freezing or temperatures above 100°F. For lasting protection of iron surfaces, a cured coat of rust remover should be sealed with two coats of high quality oil based paint. No other primer is required.
This is anti rust paint, which is equivalent to adding a film to iron products to isolate air. If rust occurs, silver paint should be applied first
It takes time to dry and it will turn black