Product description
Natural rubber and special processes create high-quality products that are resistant to high temperatures and aging.
The combination of thickened aluminum alloy inner rod and natural rubber is not easy to break. Tension balance state.
A high-quality valve core has been installed in the cavity, which is easy to use and has a high pass rate.
Material: Rubber + Aluminum Alloy
Size:0.75*1.38in/1.9*3.5cm,0.75*1.77in/1.9*4.5cm,0.75*2.0in/1.9*5.1cm
Usage: Manual Installation
Applicable Models: TR414 TR413 TR412, Motorcycles, Cars
Usage: Car Tire Air Intake
Be sure to carefully check whether this type of valve should be installed before use.
Appropriately apply tire lubricant or other lubricating paste liquid to the lower half of the selected valve to reduce resistance during installation.
Gently pull out the valve with lubricant grease from the special hole in the wheel rim using the valve extension tool.
Install the tire and inflate it. Dab a little water on the air inlet of the valve to check whether the valve is leaking. If it is leaking, use the valve core key to gently tighten the valve core and complete.
Due to differences in lighting and screen settings, the color of this item may vary slightly from the picture.
Please allow slight size differences due to different manual measurements.