TDA7498E 2.0 Dual Channel HIFI Amplifier Board 160Wx2 DC 12V-36V Gain Adjustable

TDA7498E 2.0 Dual Channel HIFI Stereo Module Support BTL 220W Dual Channel HIFI Amplifier Board With Cooling Fan Gain Adjustable

Feature:

1. TDA7498E Chip: TDA7498E is a dual channel digital audio power amplifier IC with high efficiency and high fidelity, which is widely used in audio equipment. This chip has the advantages of low distortion, high output power, and low power supply voltage, making it suitable for power amplification applications in various audio systems.

2. Support BTL Mode: Short circuit of J1, J2, J3, J4 on the back of the power amplifier board) 36V power supply, 3 ohms mono 220W output (TDA7498, TDA7498L chips do not support this function

3. Temperature Control Fan: The fan uses a temperature control scheme that is energy-saving, environmentally friendly, and low noise. The industrial grade temperature control fan has low noise and good heat dissipation effect, providing protection for high-power heat dissipation (the temperature of the heat sink is high enough for the fan to operate and force heat dissipation)

4. Fever Capacitor: Symmetric capacitor design, 12 fever capacitors, 470uf * 12=5640uf. High quality inductor, red ring inductor with low heat generation and high sound quality.

5. Satisfaction Guarantee: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly.

description:

Specification:

Certification: CE

Origin: Mainland China

Color: black board, red board (optional)

Power amplifier chip: original TDA7498E 2X160W chip

Output power: 2X160W (using a 4 ohm impedance horn unit, input voltage 36V DC, output power 160W+160W)

Channel: Dual channel stereo

Frequency response: 20Hz -20KHz

Horn impedance: 4 ohms, 6 ohms, 8 ohms

Heat dissipation method: temperature controlled forced air cooling (when the temperature of the heat sink reaches a certain level and the fan is running for forced heat dissipation)

Working voltage: 12~36V DC with input polarity reverse protection (The actual power of the speaker is large enough, and the recommended voltage is 24V, with a DC voltage of 8A or above. If the power supply is too small, it will cause distortion and sound interruption, which cannot produce a shocking effect.)

Protection function: Short circuit, overheat power supply anti reverse connection

Size: About 120x78mm/4.72x3.07inch

Weight: 165g

Matters needing attention:

Please note that the prerequisite for outputting maximum power is that the power supply and speaker requirements are within the official recommended range. When pairing, please pay attention to using a power supply with sufficient power and a speaker with appropriate impedance. For example, a 12V power supply paired with an 8-ohm speaker cannot achieve a power of 160W per side in any case. For safety reasons, we recommend controlling the power supply voltage within 32V to avoid safety hazards caused by unstable mains power supply.

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

Included: