Shelby Rubberized Liquid Asphalt Waterproofing Paint Black 4 Liter Limit 2 Gallon per checkout

READ: Small dents cannot be avoided because of mishandling of the courier, if its NOT ACCEPTAPLE TO YOU please do not order this products or have it pick up at our warehouse Thanks!

🔔We will give our best to pack to our best of our abilities. Please do not accept if your suspicious of dent or leak.

In the event of mis HANDLING please report immediately to tiktok we the seller is Not connected to the courier.

🚩PLEASE LIMIT YOUR ORDER TO 2 GALLON PER CHECKOUT BECAUSE OF PACKAGING LIMITATION!

*WE HAVE 16 LITERS/PAIL=4 GALLON IF YOU NEED BIGGER SIZE

🩸Shelby #16 Rubberized Liquid Asphalt is a paste like emulsified rubber asphalt sealing compound. When dry, it forms an impervious & highly elastic seamless sealing film, highly resistant to heat & cold.

USE: Shelby Rubberized Liquid Asphalt is applied on: • Rain & Water Exposed Surfaces - roof-sealing, roof repairs, terraces, balconies, underground garages. • Rising Moisture Areas - Cellars, floor slabs. • Ground Moisture, Meteoric & impounded water - foundations & cellar walls, firewalls. It is highly recommended to apply topcoat with any elastomeric, latex, acrytex, floor, roofing paint to protect and prevent from washing out.

🦺SURFACE PREPARATION & APPLICATION:

1.All surfaces must be clean free from dirt, oil & grease

2.A diluted solution of Rubberized Liquid Asphalt with clean WATER at a ratio of 1:1 is highly recommended as PRIMER coat in order to achieve an adequate adhesion to the surface. It should not be applied in rain & to building elements where capillary moisture do continually enter the coating from the sub-surface

3.Apply at a thickness of 90 to 100 mils equivalent to 3-4 coats. The residual water of the preceding coat must have evaporated before the next coat is applied

It is recommended during application that all the working equipment is to be moistened with water before use & to be rinsed from time to time in order to prevent the compound from setting.

4.Apply a Topcoat to protect shelby from HEAT

* Recommended Topcoat - ipatong sa ibabaw ng SHELBY

*Pag sahig o flooring - Patungan ng Floor paint.

*Sa Bubong o roofing - Patungan ng Roofing paint.

*Sa Firewall - Patungan ng Elastomeric paint o Latex paint

*Kahit ano tatak pwede o kahit ano waterbased topcoat / Any Brand or any concrete paint

*I HAVE POSTED A DIAGRAM ON HOW TO LAYER SCROLL RIGHT.

DRYING TIME: 4 1/2 hours depending on weather conditions

THINNING: Use Clean Water. Water based

SPREADING RATE: 10 square meter / 4-liter / per coat

PACKAGING: 4 liter can