AC DC PoE Injector Power Adapter Supply 24V 48V 0.5A 1A CCTV Active Ethernet 12 24 48 Volt 1000mA 500mA for IP Camera

POE Injector Ethernet Adapter IP Camera Power Supply US/EU/UK Plug

A perfect solution for applications where an electrical outlet may not be available, the injector adapter can be used to power PoE-enabled devices such as IP cameras or Wireless Access Points (WAPs). The compact, wall-mountable design makes it easy to install the adapter into areas where space is limited, and can be installed in seconds with no configuration required.

Applications

IP Camera/Phone

Wireless Access Point and Client Devices

Security Camera Systems

Features

Provides remote power to equipment through CAT 5 Ethernet cable up to 100M

Autoranging switching power supply 100 ~ 240V AC

Short circuit, over-current, and over-voltage protection

Reliable passive POE output

Compact, portable size with convenient wall plug design

Specifications

Efficiency: 80% Min

Line/Load Regulation: 3%/5%

Ripple/Noise: 200mV p-p

Turn-On Delay: 2 Seconds Max

Rise Time: 40 mS Max

Protections: Auto Recover Over-Voltage, Short Circuit, Over-Current

Environmental Standards: RoHs

Operating Temperature: -10 to +40°C (14 to +104°F)

Operating Humidity (RH): 5% - 90%

Storage Temperature: -20 to +85°C (-4 to +185°F)

Network Connector Type: RJ45 Shielded

POE Type: Passive POE ( Pins 4,5 V+, Pins 7,8 V-)

Package Include

1 x POE Power adapter

1 x cable

Note:

Power regardless of brand are universal. Please check the following 3 points:

1. Plug type.

2. voltage is same.

3. current is greater than or equal to the power of your original

As long as the conditions can be met in general, we do not know you what kind of equipment for power supply, so please

check above 3 elements.