DIY Concrete Molds Cement Walking Path Molder Floor Path Maker Stone Garden Floor Design

Path Maker Mold Stone Garden Floor Road Paver Pavement Mold

Type: Paving Mould

Color: Black

Material: Plastic

Quantity: 1 pc

Packages:

1* Paving MouldFeatures:

Professional strong plastic,you can use it minimum 1600 times,guaranteed by manufacturer. 🎇1. Very practical garden tools - Concrete garden molds will help you decorate your backyard landscape.

2. Use heavy-duty plastic molds to turn some pre-mixed concrete into concrete garden stepping stones for easy access to the garden.

3. By using garden stepping stones as your path, the beauty and health of your plants.

4. Spray the cleaning mold with a garden hose for reuse.

5. Once the first garden stepping stone is watered, the garden stone mold can be used again.

6. Ideal for creating sidewalks, sidewalks, trails, terraces, picnic areas and other outdoor finishes.

7. Enjoy DIY's personal philosophy with stone molds and create beautiful paths in your garden right away.

8. DIY plastic molding paving mold is a personalized brick mold, the effect of laying is like a stone.

9. Make the path more exotic and create a style that belongs to your own garden path.

Widely use

This reusable plastic mold for creating patterned walks, path, for patio, yard, garden, lawn etc.

How to use:

Step 1:

Mix the cement with water according to the packing instructions. When ready for use, the concrete will be the consistency of the oatmeal and thick enough to hold the edges when cut with a shovel.

Step 2:

Fill the paver mold, plow the concrete with a shovel and make sure to fill each area.

Step 3:

Use rubber gloves to spread the concrete around the mold and fill any gaps or low points. Tap the mold by hand to remove any air bubbles.

Step 4:

Smooth the concrete according to the contour of the mold and wipe off the excess.

Step 5:

Allow the concrete to set up to five minutes and carefully remove the mold. For the next stretch, rotate the mold a quarter turn and place it next to the paver you just finished. If you are creating a curved path, tilt it slightly.

Step 6: