Mini Aluminum Alloy Watch Strap And 1.55v Watch Battery Band Regulator Adjuster Watchmaker Repair ToolWrist watch1111

Fit For All Alloy Strap

 

Size:

10cm* 4cm *2cm

 

Method of use:

1. Place the band upside down in the tool and align the handle pin with the pin hole located on the side of the band (arrows should face away from the handle).  Gently but firmly, twist the handle toward the band until the pin releases.

 

***If you are adjusting a ceramic band (there are no arrows, but process is the same), you will apply the tool to the side of the band that has a small pinhole in the middle of the rod.

2. Repeat step 1, until you have successfully removed the desired amount of chain-links to fit your wrist.

3.  To reinstall the pins, insert them in reverse (toward the arrows) into the watch band.

4. Place the watch band back into the tool (with the arrows facing the handle).  Line up the handle pin with the piece of pin that's still sticking out from the band, and slowly turn the handle inward so that it pushes the pin back in and flush with the band.