SinoTrack Waterproof Mini GPS Tracker ST-901 For Car Motorcycle Vehicle Tracking Device With Free APP and Web

Welcome to the SinoTrack store!

We Provide Free Life time Mobile APP and Web Software:(we can extend time free)

-Real-time tracking, Replay, & Statistic Reports & User center Mange(more functions in full account)

Difference Between Both Option

With Battery and Without Battery

Both of them are hard wired to car battery for power energy.

ST-901 With Battery:

It has built in battery inside for back up (gps tracker can still work for few hours if disconnect with car or motor battery) , and main power off alarm( main power off alarm means sending sms alarm when gps tracker disconnect with car battery, very useful if the thief try to disconnect gps tracker and steal the car).

ST-901 Without Battery:

No built in battery inside for back up if disconnect with car or motor battery , no main power off alarm( main power off alarm means sending sms alarm when gps tracker disconnect with car battery).

ST-901 Item Function:

👉Waterproof GPS Tracker

👉Mini size easy to hide

👉Support 9v ~ 50v

👉ACC Detection(ACC Alarm)

👉Easy Installation - Minimal wiring require for installation

👉Main power off alarm(With battery only)

👉Geo-fence alarm & Over speed alarm

👉For Vehicle/Motorcycle/Scooter

👉2G VERSION GSM 850/900/1800/1900Mhz

👉Built-in high sensitivity GPS & GSM antenna,

👉GPS/GPRS/GSM/SMS Positioning and Tracking

👉SMS tracking on cellphone with google maps link

How to install tracker:

Orange wire connect ACC

Black wire connect power -

Red wire connect power +

PS: Connect ACC (engine) to detect ignition, If you disconnet the ACC, the tracker still works.

ACC function is used to detect the ON/OFF state of the car engine.If the ACC is not connected, it will not affect the normal use of the tracker.

How to Activate Online Tracking

please Send SMS configure the tracker(set IP and APN) to connect platform,

IP and port please check the user manual.

please send 3 SMS to tracker below:

SMS1:7100000

SMS2:8040000 45.112.204.242 8090

SMS3:8030000 APN APNuser APNpassword(if APN need user and pass)

please check what's the APN if you don't know.

the APN is Acess Point Network of SIM card,if you don'n know APN,

please check it with your SIM card operator.

HOW TO QUICKLY SETTING UP THE TRACKER?

STEP 1. – Activate Sim

Buy a local SIM card with 4G(LTE) network function and Install the new sim card into your mobile phone and activate the sim card and remove SIM card’s PIN code. Make sure it can make a call, send a text and has an internet connection. Once this is confirmed, insert SIM to your tracker.

STEP 2. – Turn on the tracker

Charge it about 1 hour first.

The yellow and blue indicator lights will start flashing while it searches for a network and GPS.

Please wait 5 minutes in a good reception area (by a window or outside) for both lights to come on constantly. It will continue to flash yellow if it can not find a network. Move it to another location.

Please note, when the device has a GPS signal it will get a GPS location. If not it will get its location using LBS.

STEP 3. - Setting APN for the tracker

(1) You need to know your tracker’s SIM card's APN (You can ask your SIM card provider);

(2) Please note the following operations need From another phone number send text messages command to the tracker’s sim card’s phone number to set tracker's APN.

For example:

APN is: everywhere

APN username is: eesecure

APN password is: secure

(1) If your SIM card’s APN without username and password, then send text command(8030000+space+APN) to the tracker, it will reply "SET OK".

Text command is: 8030000 everywhere

(2) If your APN with username and password:

Then sned text Command(8030000+Space+ APN+space+ APN user+Space+ APN pass) to the tracker : 8030000 everywhere eesecure secure

Please note: Different SIM card has difference APN. Please apply the above formula according to your actual APN to set up your machine

STEP 4. - Setting GPRS mode

Send text command to the device to set GPRS mode:7100000

Then wait about 30sec, both blue and orange light should stay ON which mean you can now login to sinotrackpro web or app to check if tracker active. (Username is your tracker’s ID number that write on the product, password: 123456)

If you set ok of all, you can track it online. If it online but show China location, then take it to the outside which signal good place to get GPRS signal, when it get signal, will update your location.

If the device is not online, please check device setting, send: RCONF to device,

It will reply the setting you can check in reply:

1. The APN if is correct;

2. The IP and Port if is correct(IP and port are write in the usermanual,you can check if same as reply)

3. The device working model, (GPRS model)

How to Login Platform:

Choose Server VIPSinoTrack

User:ID number on device

Pass:123456(please change it after you received device)

Package Included(with Original Box):

1 x Sino Track GPS Tracker ST-901

1 x User manual