Product description
How to apply adhesive film
1: Measure the size and cut the film. Cut the film a little larger than the glass size. If the width is the same, just cut the length.
2: Wipe the glass clean with clean water, and spray water evenly on the glass to ensure that the film can move on the glass and adjust the position easily.
Three: Tear off the backing paper of the film, spray some water on the glued side, carefully apply it flatly, and adjust the position.
Four: Use a scraper to gently scrape out the water on the glass and smooth it. If the bubbles are difficult to scrape out, you can peel off part of the film and spray water again.
Five: Place the scraper on the edge of the glass at a right angle. Use a knife to press the scraper close to the edge and push it down slightly.