Davies Gloss-it QDE Paint for Wood / Furnitures 1L (Reds and Yellows)

Quick Drying Enamel

DAVIES® Gloss-it® is a high-performance decorative and protective alkyd-based gloss enamel for application on properly primed wood, metal, and other architectural surfaces.

Type: Alkyd Enamel

Finish: High Gloss

Color Range: White, Black, 27 Standard Colors, Tint Bases for Pastel, Medium, Deep Colors

Practical Coverage: 30-35 sqm / 4 liters / coat depending on surface porosity

Pack Sizes: 1/4 liter, 1 liter, 4 liters, and 16 litersFEATURES

• Smooth, high gloss finish

• Very good durability

• Excellent adhesion to properly prepared surfaces

RECOMMENDED USE

Suitable for interior and exterior substrates such as furniture, cabinets, kitchen walls, bathrooms, window frames, garden sets, tools, bicycles, automotive, and steel structures for factories and warehouses.

PAINTING INSTRUCTIONS

Application Tools: Brush / Roller / Spray

Thinning: Dilute with not more than 5% DAVIES® 40 Paint Thinner

Surface Preparation

A. New Surfaces

Wood Surfaces:

• All surfaces must be clean, dry, and free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and all other foreign

materials.

• Sand wood surface until smooth to touch with no slivers or rough edges. Dust off and wipe with a clean rag.

Metal Surfaces:

• All surfaces must be clean, dry, and free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and other foreign materials.

• Wipe off oil and grease with solvent or lacquer thinner.

• Remove rust, mill scale, and stains with sandpaper, wire brush, or other abrading methods.

• Treat iron surfaces with a heavy coating of rust and scale withDAVIES® 200-X Rust Converter, wipe off the residue, and clean with lacquer thinner.

• Apply the appropriate metal primer immediately after cleaning and drying to avoid the onset of corrosion.

B. Previously Painted Surfaces

Wood Surfaces:

• Use DAVIES® 300-X Strip-Eze Paint Remover to aid in scraping off old paint.

• Patch all holes and imperfections with DAVIES® 1000 Pro-LuxRGlazing Putty. Sand smooth and dust off

Metal Surfaces:

• If the existing paint is sound and shows slight chalking, sand lightly and wipe off dust.

• Remove cracked, peeling off old paint by scraping, wire brushing, or sanding. Use DAVIES® 300-X Strip-Eze Paint Remover to aid

in scraping off old paint.

• Treat heavily corroded surfaces with DAVIES® 200-X RustConverter, wipe off the residue, and clean with lacquer thinner. • Apply the appropriate metal primer immediately after cleaning and drying to avoid the onset of corrosion.

Painting System:

Wood Surfaces

Primer/Sealer: Apply one (1) coat of DAVIES® 1360 Interior Wood Primer & Sealer Putty: As needed, apply DAVIES® 1000 Pro-Lux® Glazing Putty on surface imperfections Primer/Sealer: Apply one (1) coat of DAVIES® 1360 Interior Wood Primer & Sealer Topcoat: Apply two (2) coats of DAVIES® Gloss-it® Quick Dry Enamel

Metal Surfaces

Primer/Sealer: Apply one (1) coat of DAVIES® Metal Primer

Topcoat: Apply two (2) coats of DAVIES® Gloss-it® Quick Dry Enamel

Recoating Interval: 2-3 hours

Drying Time: 24 hours

Clean-Up: Clean water

STORAGE AND HANDLING

• Keep the container closed when not in use.

• Store in a cool, dry and well-ventilated space.

• Do not transfer contents to other containers for storage.