One-Way Car Alarm High Security System with Remote, Shock Sensor, and Central Door Locking

(A)Mainframe system

Working Voltage: 12V = 3V

Static current: 8mA

Shock Sensor Current:< 1mA

Output Current (max): Direction Light: 5A; Siren: 10A

BIBI Pager: 10A; Central Door locking: 10A

working Frequency: 315 MHZ/433 MHZ

(B). Remote Control

Working Voltage:12V/9V/6V

Static Current: 0mA

Battery size: 27 A/23 A/CR2016

Working Frequency:315MHZ/433MHZ

FEATURES:

1. Arm/Disarm

When pressing "

A", siren will chirp 1 time, parking lights will flash 1 time, and the system entry arm

mode.

If equipment has a central door lock, car doors will lock automatically. The status LED flashes approximately once per second.

When pressing " "

The siren will chirp twice, parking lights will flash twice, and the system

entry disarms mode. Car doors unlock automatically.

If in muted mode, the siren will not chirp, parking lights will flash once, and car doors will lock automatically.

2. Mute arming

When pressing "X,"

siren will not chirp, parking lights will flash once, and the system entry arm

mode. If equipment has central door lock, car doors will lock automatically. The status LED flashes approximately once per second. Under mute mode, if the alarm shocking sensor is triggered, the parking light will flash but the siren will not charge, suffer from heavy shock continually, the car door or ACC is triggered illegally, and the siren will sound for 30 seconds

3. The car door never closes, reminding

The system is constantly monitoring all of the switches and sensors that are connected to it. It detects any faulty switches and sensors and prevents them from disabling the entire system. If you hear a second siren sound followed by 3 chirps, it indicates doors are not closed properly.

4. Auto re-arm

Under disarm mode, if owners do not enter the car within 30 seconds, the alarm system will automatically re-arm and lock the doors if a central locking system is fitted.

5. Unique alarm trip indicators

The siren sounding will tell you how the alarm was triggered; if the car body was bumped lightly, then the LED light and parking light flash, with the siren sounding sometimes. If the car body was bumped continuously or the car doors were triggered, the siren would keep sounding for 25 seconds.

6. Auto-central door

When driving, press "

" button to lock or unlock the doors, but the alarm system

will not be working. Turn on the ignition ACC "ON" position after closing the car doors properly, Step on the foot brake after 15 seconds, and the car doors will be locked automatically. Please note that the doors will not be locked automatically if the ignition key is not turned to the ACC "ON" position or if the doors are not closed properly.

The car doors will automatically unlock when the key is taken out of the ignition switch.

7. Call for emergency help

When driving, press the "©" button. The siren will keep sounding, and parking lights will keep flashing to call for emergency help for 15 seconds. Press the """ button again to complete the above operation.

8. Car finding

When the system is in arm mode, press the "" button once, sirens will sound, and the parking light will flash for 15 seconds, This feature is particularly useful for finding the car in a large car park. Press the "A "button once again to stop this function. (under the mute mode, the parking light flashes for 15 seconds only without siren sounds.)

9. Memory alarm mode

The system will store its current state in non-volatile memory; if power is lost, the system will recall the stored state from memory.

10. Remote trunk release

Under disasters mode, press and hold the """ button for approximately. 3 seconds to release the trunk.

11. Learning code

New code learning procedure: during disarm mode, stay inside the car, open the car door, then step always on the foot brake, turn the ignition key from the "ON-OFF-ON" position 3 times, the last stay in the "ON" position, press any button on the remote, and siren chirp 1 time. It means new code learning succeeds.

12. Remote learning code cancellation

If the remote control is lost, it is necessary to cancel the remote control's code in the brain module for safety reasons. Remote learning code cancellation procedure: open car doors, step always on the foot brake, turn the ignition key from "ON-OFF-ON-OFF-ON

"OFF-ON-OFF-ON-OFF-ON-ON-OFF" position 8 times, last stay

"OFF" position, the siren chirps 2 times. The system is in disarm mode.

TROUBLESHOOTING

1. The remote control does not work

*Check the battery level; it is suggested to replace a new battery each year.

*Check if the remote control is moistened or crashed

2. The remote control does not make the main unit work

*Check the battery level in the remote control

*Check if the remote control is moistened or crashed

Check if the frequency of the remote control is changed.

*If possible, use another control for comparison; if both of them do not work, then check The main unit and the wire connection.

3. The central lock does not work

Check if the actuators are working

Check wire connection

Check if the fuse of the main unit is damaged

4. The siren does not sound when the system is triggered

Check if the siren is not available

Check the wire connection between the siren and the main unit

3. The siren keeps chirping while the main unit is installed.

* Check if the socket is inserted; conversely, check the wires connection or the CPU safety Fuse

*If a backup battery is used, check if the switch is positioned at ON status

6. The alarm sounds 10 seconds. after the vehicle is armed, the same problem keeps happening again

Check if the shock sensor is too sensitive

Check if the door pin switch is damaged

Check wire connection

7. The alarm is easily triggered when a heavy vehicle is passing through