Bambu Lab A1 Mini Combo series allows 4-Color AMS lite Full Auto Calibration FDM 3DPrinter

Experience superior reliability with an all-metal frame, bearings, and rails. Bambu Lab performance is delivered straight out of the box, crafted for consistent and long-lasting use.

Key Features:

Build Volume(W*D*H): 180*180*180 mm³

Full-auto Calibration.

4-Color Printing with AMS lite.

Under 48 dB Low Noise in Silent Mode.

Full-metal Linear Rails and Bearings.

Vibration and Flow Rate Compensation.

Each purchase of A1 Mini Combo 3D Printer comes with a High Quality Polymaker Filament Freebie

Comes in the box:

A1 mini

Spool Holder

Purge Wiper

Build Plate

PTFE Tube*1

Bambu Filament Samples (Random Color)

Stainless Steel Nozzle（Included）

Accessory Box

+Exclusive Polymaker Filament Freebie

Multi-Color Printing

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Active Flow Rate Compensation

The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Plug-N-Play

The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.

Active Motor Noise Cancelling

The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision）

Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

A1 mini Tech Specs:

Specification:

Build Volume(W*D*H) 180*180*180 mm³

Toolhead: Hot End All-Metal

Nozzle: Stainless Steel

Max Hot End Temperature: 300 °C

Nozzle Diameter: 0.4 mm (Included) (0.2 mm, 0.6 mm, 0.8 mm)

Heatbed Build Plate: Bambu Textured PEI Plate (Included) (Bambu Smooth PEI Plate)

Max Build Plate Temperature: 80°C

Max Speed of Tool Head :500mm/s

Max Acceleration of Tool Head: 10m/s²

Supported Filament: PLA, PETG, TPU, PVA

Ideal for ABS, ASA, PC, PA, PET,

Carbon/Glass Fiber Reinforced Polymer: Not Recommended

Sensors Monitoring Camera: Low Framerate Camera (Up to 1080P)

Timelapse Supported