50 Watt Solar Panel 12 Volt Monocrystalline DC Solar Panel Module charging Board with solar charger controller regulator 10A 20A 30A 40A 50A 100A for PV Power for Home Camping Outdoor

- High conversion efficiency, long service life, to ensure full power.

- The unique process component, beautiful and strong anti snow, convenient installation.

- Aging resistance, corrosion resistance, weak light effect.

- Suitable for all kinds of small power appliances, emergency lights, advertising lights, traffic lights, home lights, electric fans, such as solar water pumps, solar street lights, small solar systems, etc.

Specification:

Material: Polycrystalline silicon solar panel

Working voltage: 12V

Size: 135*210mm/5.3*8.2 IN

Cable length: about 300cm

Process: PET laminated

How to conncect:

1. This solar panel can only be directly connected to products with DC interfaces. You can directly connect products with DC interfaces.

2.If you want to connect a product with a non DC interface, you need a corresponding adapter, such as a DC to USB adapter

Package included:

1 x Solar panel

Note:

1.Please allow 0.5-1 inch difference due to manual measurement. (1inch=2.54cm)

2.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.

Specifications:

Shell Material: Plastic

Back Board Material: Iron(10A-100A)

Color: Black+Blue

Display: LCD Screen

Batt Voltage: 12V/24V auto

Charge Current: 10A, 20A, 30A, 40A, 50A, 60A，100A(pls choose which current you need)

Discharge Current: 10A, 10A, 10A

Self-consumption: ＜10MA

Operating Temperature: -35~+60

Max Solar Input: 12V battery, the highest 23V

Float Charge: 13.7V(defaul, adjustable)

Discharge Stop: 10.7V(defaul, adjustable)

Discharge Reconnect: 12.6V(defaul, adjustable)

Charge Reconnect: 13V

Voltage of Open Light: Solar Panel 8V(Light lights delay)

Voltage of Close Light: Solar Panel 8V(Light off delay)

USB Output: 2 way USB output, 5V/2.5A(MAX)

Size: (L)X(W)X(H) 13.3x7x3.2cm

Features:

● Build-in industrial micro controller

● Fully 3-stage PWM charge management

● Big LCD display, all adjustable parameter

● Dual mosfet reverse current protection, low heat production

● Dual USB output, the maximum current of 2.5A, to support Apple's mobile phone charging

● Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection

● Suitable for solar green light, solar light boxes advertising board, solar insecticidal lights, housing solar power generation system, marine solar power generation system, outdoor survival solar power generation system

SYSTEM CONNECTION

1.Connect the battery to the charge regulator-plus and minus

2.Connect the photovoltaic module to the regulator-plus and minus

3.Connect the consumer to the regulator-plus and minus

NOTE: The reverse order applies when deinstalling, an improper sequence order can damage the controller

SAFETY INSTRUCTIONS

1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation

2.The battery cable should be as short as possible to minimize loss

3.The regulator is only suitable for lead acid batteries: OPEN,AGM,GEL, it is not suited for nickel metal hydride, lithium ions or other batteries

4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator

Package Included:

1 x Solar Charger Controller

1 x English User Manual

(excluding other decorations)

Please feel free to contact us if you have any questions. Hope a nice day!

Notice:

Please allow slight deviation of measurement due to manual measurement.

Due to different producing batches, product details might be a little different.

Due to different monitors and different light, the picture may not reflect the actual color of the item.