Product description
Each lightsaber is equipped with a strap that can be wrapped around the handle.
the hilt is 21 cm long and 3 cm in diameter; with a 7/8 inch blade, the blade is 78 cm long with a round head, and the whole sword is 97 cm long.
1 * handle,1 * blade,1 * USB charging line,1 * hex wrench
Turn on and off: press the button to turn on, after turning on, press and hold for 2 seconds to turn off.
Knock: Knock the blade to play the sound effect.
Wield: Wield the lightsaber to play the percussion sound.
Light color selection: Press the button in the power-on state to switch seven light colors in sequence, and play sound effects at the same time.
Sound effects: switch machine sound effects, standby sound effects, waving sound effects, knocking sound effects, low battery sound effects, charging sound effects, etc.
Low battery reminder: sound effect reminder, automatic shutdown.
After power on, the standby sound effect (or background sound) is activated; the waving or percussive sound is activated in real time.
Charging: Connect the DC end of the charging cable to the lightsaber charging hole, and the USB end to the charging base with the output parameter of 5V1A for devices with USB ports (adapters, PCs, mobile phone chargers, etc.). When charging, the blade lights up slightly to start charging, and then goes out when it is fully charged. The charging time is generally 2-3 hours, and the charging time is different depending on the selected charging station. [This is a light saber with sound and lighting, the main sword is detachable, and the others are not allowed to be disassembled! ]
Charging voltage: 5V (MAX)
Material: aluminum alloy, high quality PC
Battery: 18650 3.7V battery 1200-3200mAh
Light group: 5 W LED or RGB LED single color or multiple light colors
Warning[This product is an LED illuminated toy. Looking directly at it for a long time may affect your eyesight! ]
[Children under 5 years old are not allowed to play! Just for fun! Stop violence! ]
[Please use the original USB charging cable first! You can connect to the USB port of the computer to charge, or you can charge the charger through the 5V1A output! ]
[This product is a lightsaber props toy electronic product, built-in rechargeable lithium battery, not waterproof, not in contact with water! ]
[The lightsaber has insufficient power and must be fully charged in time before storing! For long-term storage, it is recommended to charge and discharge once a month. ]
[It is forbidden to use chargers with large output parameters for charging! ]
[The light guide film inside the blade acts as a light guide, please do not take it out! ]
[Light saber, the main blade can be disassembled, others are forbidden to disassemble! The left and right symmetrical screws on the hilt are used to fix the blade, and can be turned to fix or remove the blade; the screws on the han