Rehabilitation Robot Gloves Mirroring Stroke Hemiplegia Hand Function Training Glove Finger Care Equipment Size M/L/XL Comfort

Please Note : This needs to be plugged in to use Function: 1. Passive training: After powering on, the default is passive training. At this time, the first icon on the left side of the host lights up, and the gloves continue to be passively stretched and held, driving the hands to close automatically. You can press the third button on the right side of the host to change gears. Adjustment, 1~9 gears, the larger the number, the greater the intensity, and the longer the opening and closing time. 2. Mirror training: In the power-on state, press the first button on the right side of the host [mode switching button]. After pressing, the second icon on the left side of the host will light up, and the gloves will become continuously straightened. It proves that the mirror mode is turned on. At this time, we press the button on the palm of the mirror glove and hold down the button. The training glove will make a fist. When the hand wearing the mirror glove releases the button, the training glove will stretch. Repeat this action, which is mirror training. process. 3. Confrontation training: In the power-on state, press the first button [mode switching button] on the right side of the host twice to switch to the confrontation mode. At this time, the third icon on the left side of the host lights up, proving that it has entered the confrontation mode. [Confrontation means that when the host makes a fist, you straighten it with force. When the host straightens, you make a fist with force and compete with the machine for training] 4. Split-finger training: Rotate the valve [valve] on the back of the glove to the horizontal position, which means closing the trachea of this finger, and the vertical position, which means opening the trachea of this finger. (Note: each closing time cannot exceed 5 minutes at most) Scan the code to read the manual 1. Wear training gloves: Try to extend your fingers to the bottom, and the Velcro on the wrist should be as tight as possible to avoid loosening and roughness during training. The strap should be fixed at the tiger's mouth, and the thin strap is used to fix other fingers. If any finger cover is loose and easy to fall off, it can be fixed with a thin strap. 2. Connect the host: Rotate the glove connector into the jack on the left side of the host. Be careful to screw it in, because the host is driven by gas. The gloves are movable, so the jack will be tight and cannot be inserted directly. 3. Wear mirror gloves: Mirror gloves are worn on the unaffected hand. Please connect and put on your gloves before plugging in the power and turning it on. Note: The exhaust and heat dissipation holes of the main unit are at the bottom, so the bottom of the machine needs to be kept clean and ventilated. It cannot be used on a bed or on the ground. Damage caused by improper use is not covered by the warranty. Please be informed. Package include: 1x Rehabilitation robot gloves 1x Mirror gloves 1x Machine 1x Type C USB