Product description
*This is a 12V-24V general-purpose solar charge controller. When start the solar charge controller so that it can work normally..
it for the first time, please make sure that the battery has enough power t
*The battery cable should be as short as possible to minimize loss.
*The scope of use of solar charge controllers: Leads acid batteries(OPEAGM, GEL), ternary lithium battery, lithium iron phosphate battery.
*The charge regulator is only suitable for regulating solar modules.u Never connect another charging source to the charge regulator.
*Build-in industrial mini controller.
*Big LCD display, all adjustable parameter.
*Fully 3-stage charge management.
*Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.
*4 way USB output, the maximum current of 2A, to support Ap mobile phone charging.
Part Name: Solar Controller
Max solar input:12V battery, the highest 23V;24V battery when the highest 46V
Battery type:b01=Leads acid battery 12V/24Vauto;b02=Lithium-ion battery (lithium battery) 3 strings 3.7V=1;b03=Lithium iron phosphate battery 4 strings 3.2V=12.8V
Equalization:14.4V(b01);12.6V(b02);14.6V(b03)
Discharge stop:10.7V(b01);9V(b02);10V(b03)
Discharge reconnect:12.6V(b01);10.5(b02);12V(b03)
Voltage of open light:Solar panel 8V(Light lights delay)
Voltage of close light:Solar panel 8V(Light off delay)
USB output:4 way USB output, 5V/2A(MAX)
Operating temperature:-35 ~ +60℃
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.