About this product
Steering & Suspension Tools TypeTire & Lug Tools
Measuring Tools TypeHydraulic Jack
Warranty TypeSupplier Warranty
Product description
We're using high-quality materials, which are very strong construction steel, enamel layers that are folded and not easily overlooked, with modern equipment and precision. Please observe the things below in using hydraulic cracks:
Before glued to raise the dongkrak, please check first the locking pen at the bottom. Turn right to date. Rotate the top to the left to get the maximum height, just after swallowing slowly.
Rotate the locking cartridge on the bottom left just a little bit, the crack will fall because of the pressure from above. After the crack came down, the locker rode back to the right so the oil wouldn't leak.
WARNING: When the locking cartridge is turned left to too loose or if it is not closed back to the right, then the oil can remain sprinkled out. All the stuff we sent was checked first to make sure there was no leak.
Application environment: Off-Road Car Transport Become Small Commercial Car Transport
Structure: Oil pressure Y + hydraulic pressure
Model (optional): 2T, 5T, 10T
2T: Minimum height: 148mm Elevation height: 90mm Detector height: 52mm Maximum height: 290mm Weight: 1,8kg
5T: Minimum height: 180mm Elevation height: 115mm Detector height: 60mm Maximum height: 355mm Weight: 2.6kg
10T: Minimum height: 200mm Elevation height: 130mm Detector height: 70mm Maximum height: 380mm Weight: 3,4kg
1. Put jack in vertical state.
2. Lower the pump and piston, until it is completely loose.
3. Remove the rubber oil plug.
4. Pour into high quality hydraulic oil.
5. Mount rubber oil plug.
6. Regular lubricate transmission joint and adjusting screw.