300W MPPT Solar Charger Controller For Ebike Solar Boost Charge Controller 24V/36V/48V/72V Solar Power Charge Controller For Ebike Solar Power Battery Charger Electric Bicycle Battery Charger Controller

•Features1. Short-circuit Protection: Charger O/P cut-off automatically when short circuit.2. Overload Protection: Charger O/P current-limited automatically when overload.3. Aluminum case for good heat emission;The above specifications issubject to change without prior notice.Charge controller Introduction:1. Compatible chargeable battery voltage is24V/36V/48V/60V/72V ,or if your battery is not such voltage, you can configure the battery charging voltage as your wish.(User setting by the inner switch button)2. Built-in child lock safety switch, when the switch is locked, the external battery parameters can not be configured anymore, to prevent any charging error caused by mis-operation, when child lock switch is ON, it does not affect the digital display and voltage check.3. With high performance MCU design, four LED digital, can display the solar panel charging voltage, the charging current and battery voltage.4. Improved charging program, can always get the maximum powerpoint of the sunlight, regardless of the sunlight is strong or weak.5. With LED screen to display the solar panel and battery status.6. Completely solar powered, no power consumption from the battery.7. With over-charge protection, reverse connection protection for solar panel and battery.User Guidance for this charge controller:1. Please determine the charging cable length first, the cable length should be as short as possible to minimize the electrical loss during the charging;2. Please connect the solar panel, and make sure not to connect it into the opposite polarity. The LED indicator "solar panel" on this charge controller will be ON if it is connected properly. The solar panel must be placed outdoor completely; 3. Please connect the battery, and make sure not to connect it into the opposite polarity. The solar panel charging current will be ON if the battery is connected properly.4. If the e-bike battery voltage is 60V, 72V, it is suggested that to use a solar panel with open circuit voltage over 30V, to get the higher charging efficiency.

•Product Name:EV Charge controller

•Model Number:MT300W

•Type:MPPT

•Charger Controller, Solar Working Station, Voltage Controller....

•Work Time (h):As per sunlight radiance

•Max PV Power:300W

•Max PV Voltage:50V

•System voltage:24V/36V/48V/60V/72V(Self Configurable)

•Conversion Efficiency:≤97%

•MPPT Tracking Efficiency:>99%

•MPPT voltage range:12V-50V

•Maximum charging current :16.7A

•Working temperature:-35℃-65℃

•Insulation resistance :AC1KV,5min test /> = 20 megohm

•Protection level:IP30

•Battery type:Lithium battery or Lead Acid Battery

•Controller type:Off-grid MPPT Charge controller

•Battery types supported: Various battery types (customer provides manual setting button to set battery voltage and charging parameters)