1 pair Car Auto A/B/C/D/E/F Type Shock Absorber Spring Bumper Power Cushion Buffer(Red) - intl

Effectively solve problem of springs weakness when heavy load & improve performance of shock absorber.Improve driving comfort and more stable during curve corner.Reduce pumping of absorber when passing through road hump or yellow line.Reduce noise and vibration during travelingProtect shock absorber and suspension system to avoid oil leak.Extend absorber life more than 2 times.Improve braking efficiency.Size for all type of car including lowered spring and adjustable.Easy installation.Improve driving stability, enhance driving comfort and enjoy driving pleasure;It can reduce the vibration of the car body finitely and absorb the noise of the suspension system;Solve the problem of spring weakness and increase the car body by 0.2-0.3 cm;Limited buffering and absorption of instantaneous pressure caused by rugged road surface to avoid damage to the damping system.

1. Can be installed in 4S shop. Park the car on a flat surface before installation, and prepare a rubber stand, a wheelchair (on a shelf if the conditions are more comfortable), soapy water (you can also use diluted detergent water instead);

2. Lift the car body from the installation part, and the wheelchair stretches out the spring for easy installation. The shock absorber spring can be seen completely without raising it too high;

3. Spray soapy water to clean the spring (especially to remove sand stains on the surface of the spring), and spray soapy water on the rubber pad at the same time (full lubrication will make the spring easier to sit and calibrate). After installation, wash thoroughly with soapy water to prevent car safety parts - shock absorbers from rusting and breaking or causing personal injury;

4. Place the bumper rubber in the center of the spring. Once the wheels are installed, place the body and make sure the springs are inserted into the rubber pads.

Spring Application Clearance: 27mm/23mm/15mm

Spring thickness: 10mm/10mm/9mm

Spring diameter: 131mm/113mm/112mm

Effectively solve problem of springs weakness when heavy load & improve performance of shock absorber.Improve driving comfort and more stable during curve corner.Reduce pumping of absorber when passing through road hump or yellow line.Reduce noise and vibration during travelingProtect shock absorber and suspension system to avoid oil leak.Extend absorber life more than 2 times.Improve braking efficiency.Size for all type of car including lowered spring and adjustable.Easy installation.Improve driving stability, enhance driving comfort and enjoy driving pleasure;It can reduce the vibration of the car body finitely and absorb the noise of the suspension system;Solve the problem of spring weakness and increase the car body by 0.2-0.3 cm;Limited buffering and absorption of instantaneous pressure caused by rugged road surface to avoid damage to the damping system.

1. Can be installed in 4S shop. Park the car on a flat surface before installation, and prepare a rubber stand, a wheelchair (on a shelf if the conditions are more comfortable), soapy water (you can also use diluted detergent water instead);

2. Lift the car body from the installation part, and the wheelchair stretches out the spring for easy installation. The shock absorber spring can be seen completely without raising it too high;

3. Spray soapy water to clean the spring (especially to remove sand stains on the surface of the spring), and spray soapy water on the rubber pad at the same time (full lubrication will make the spring easier to sit and calibrate). After installation, wash thoroughly with soapy water to prevent car safety parts - shock absorbers from rusting and breaking or causing personal injury;

4. Place the bumper rubber in the center of the spring. Once the wheels are installed, place the body and make sure the springs are inserted into the rubber pads.

Spring Application Clearance: 27mm/23mm/15mm

Spring thickness: 10mm/10mm/9mm