Adjustable DIY Insect Screen Magnetic Window, Magnetic Frame for Fly Screen, No Punching Required

Highly sealed：Working principle, magnetic strip on frame magnetic attracting with the groove strip with mesh. highly sealing

It can be used repeatedly by opening Easy to take apart and wash

The larger size can be cut into smaller ones at will ，Better big than small when choosing

Updated density net 20*20mesh； Good light transmission Resistance to tear

Widely used in aluminum alloy windows Plastic steel window Wooden windows Curved windows, etc.

Materials include：1 roll of magnetic strip， 1 roll of PVC decorative strip， 1 piece of mesh net ，A pack of accessories (including 4 pcs of corners, 2 pcs of clips)

Installation method:

1) Clean the original window frame and let it dry.Tear off the adhesive film of the magnetic strip and stick it flat around the window frame.Cut off the excessive magnetic strip.

2) Attach the remaining magnetic strip to the magnetic strip glued around the window frame.(If the magnetic strip does not fit perfectly, You need to change the direction of the outer magnetic strip.)

3) Tear off the adhesive film of the outer magnetic strip. Stick the mesh on the adhesive tape around the magnetic strip evenly.Insert the plastic strip into the corner

4) Tear off the adhesive film of the plastic strip, Align and stick on the magnetic strip to clamp the mesh. Insert the corner when glued to the corner, and insert the other side of the plastic strip at the same.(Note that the magnetic strip should be pressed into the corner slot at the corner to avoid the corner from popping out. Install the rest in turn.)

5) Cut off the excessive mesh. 6) Use clips to clamp the outer frame of the screens window, Tear off the adhesive film from the clip, Attach to the magnetic strip of the window

frame about 30cm from the top, Then press the clips and the surrounding frame, and finish.