B10-AL Fuel Tank Filter Fuel Water Separator Assembly with PF10 Element Professional Filters

Material: Metal

Color: As shown.

Fuel filter element: 30 microns with protective film

Height: 9.5inch

Inlet/outlet size: 1 inch NPT

Transparent bowl with drain valve

Flows rate: maximum 25 gpm

Working pressure: up to 150 psi

Gravity flows rate: approximately 5 gpm

Note:

Installation:

1. Connect the filter top cover to the tank valve at the opening marked "IN".

2. Connect the hose and nozzle to the filter opening marked "OUT".

3. When installing the filter element and filter cup, apply a layer of oil on each side of the gasket.

4. These components can only be tightened by hand. Tightening the filter cup too tightly can make it difficult to disassemble in the future.

5. After assembly, check for any leaks.

#Oil Water Separator