[GOOD]100/50METERS X 8-10FT (1.5/1.25inch hole)POLY NET/CHICKEN NET/CONSTRUCTION NET/RANGE NET

Range Net Installation Guide Note: To achieve the required height of the range net, the distance between each pillar must be 4 feet or 1.2 meters 1. Cut the tape or rope from the net roll 2. Measure the width/length of the net and the mesh size. Please have a partner hold both sides of the net to ensure proper stretching and measurement 3. Then, tie the rope that came with the package. Use the white or blue ropes installed at the top and bottom of the net as guides. Also tie the free rope there 4. Be sure to remember that when installing the net, proceed slowly. Starting from the article, you can start from the bottom and pull upwards. Alternatively, you can start from the top and pull downwards 5. Once there are perfect diamond-shaped holes in the net and the height is correct, you can move on to the next pillar 6. Repeat step 5 for the next few posts 7. Please remember that you cannot completely install the net and then pull it up again. The situation that will occur is that the height of the net will be very low because you won't be able to adjust it anymore. Similarly, you cannot completely install the net and then pull it down because it's already fixed and cannot extend to the deepest level