Product description
After-sales service: If you encounter the following problems:
1. Received damaged products
2. Received an incomplete product
3. The product is damaged or only used for a few days.
Solution: Please contact us directly and we will resend you a new product. We will take care of all the cost, you don't need to pay anything
[Product Advantages]: Using A Single Component Curing Technology, Farewell To The Characteristics Of Traditional Plastic Steel Mud, It Needs To Be Mixed, With Good Viscosity And High Temperature Resistance And Low Temperature.It Can Be Used Immediately After Opening The Lid, Easy To Operate.After Curing, It Is As Hard As Porcelain, White And Stain Resistant, Waterproof And Mildew Proof.
[Product Use]: Waterproof Seal Suitable For Wet And Mildew-Prone Places Such As Toilets, Sinks, Shower Rooms, Doors And Windows, Wiping Edges, Waterproof Seams Between Walls And Floor Tiles Gap.
1. Clean the tile gap. The depth of the gap is 2 to 3 mm. If the gap is too large, it is recommended to fill it with a grout first and then use tile reform.
2. Open the bottle cap, remove the sealing aluminum gasket, and replace the pointed mouth cap. After unscrewing the cap, stand the bottle upside down for about 20 seconds, aiming the pointed mouth directly at the tile gap, and squeeze the paste evenly along the gap (Note: You can also paste masking paper along the edge of the tiles, and then squeeze out the tile reform, and then tear off after the paste is smoothed)
3. Use a small scraper (or press ball) to gently scrape back and forth several times to make the beautifying agent evenly enter the gaps. It is recommended to apply several times to fill the gaps as much as possible.
4. After scraping, remove the excess paste, and it will feel dry naturally. It is recommended that the drying time is 2-3 days, during which it is not suitable to use water.
5. For large or deep gaps, apply several times every other day.