Product description
The **Toyota Oil Filter 90915-YZZE1** is a genuine Toyota replacement oil filter designed to meet the specific needs of Toyota vehicles. It ensures optimal engine performance and longevity by effectively trapping contaminants and providing clean oil flow. This filter is commonly used in a variety of Toyota and Lexus models.
1. **Genuine Toyota Part:** Specifically engineered for Toyota vehicles to meet factory standards.
2. **High Filtration Efficiency:** Captures dirt, debris, and microscopic contaminants effectively.
3. **Durable Construction:** Built to withstand high oil pressures and extreme operating conditions.
4. **Anti-Drain Back Valve:** Prevents oil from draining out of the filter when the engine is off, ensuring faster lubrication during startups.
5. **Easy Installation:** Designed for straightforward replacement in compatible Toyota vehicles.
- **Part Number:** 90915-YZZE1
- **Filter Type:** Spin-on oil filter
- **Thread Size:** M20 x 1.5
- **Seal Diameter:** ~65 mm (varies slightly depending on the batch)
- **Height:** Compact design for Toyota engines.
- **Media Material:** High-quality synthetic or blended media for enhanced filtration.
- **Compatibility:** Works with Toyota vehicles with specific engine sizes, such as 1.5L, 1.8L, 2.0L, and 2.5L, among others.
This oil filter is compatible with a wide range of Toyota and Lexus models, including:
- **Toyota Cars:** Corolla, Camry, Yaris, Prius, Avensis, and more.
- **Toyota SUVs/Trucks:** RAV4, Highlander, Tacoma, Hilux, and others.
- **Lexus Models:** Certain Lexus models with engines compatible with this filter.
Always refer to your vehicle''s owner''s manual or consult a dealer to confirm compatibility.
1. **Prepare the Tools:**
- New oil filter (90915-YZZE1)
- Correct grade of engine oil (refer to your owner''s manual)
- Filter wrench, drain pan, and clean cloths.
- Remove the oil drain plug and let the old oil drain into a pan.
- Replace the drain plug once the oil has fully drained.
3. **Remove Old Oil Filter:**
- Use a filter wrench to unscrew the old oil filter.
- Be prepared for some oil spillage.
4. **Prepare New Filter:**
- Apply a thin layer of fresh oil to the new filter''s gasket to ensure a good seal.
5. **Install the New Filter:**
- Screw on the new filter by hand until snug, then tighten an additional ¾ turn. Do not overtighten.
6. **Refill Engine Oil:**
- Pour the recommended amount and grade of oil into the engine.
- Check for leaks around the filter and drain plug.
- After starting the engine and letting it run briefly, check the oil level and top off if needed.
- **Replace Regularly:** Replace the oil filter with every oil change (usually every 5,000–10,000 km or as specified in your manual).
- **Use Genuine Parts:** Genuine filters like the 90915-
The **Toyota Oil Filter 90915-YZZE1** is a genuine Toyota replacement oil filter designed to meet the specific needs of Toyota vehicles. It ensures optimal engine performance and longevity by effectively trapping contaminants and providing clean oil flow. This filter is commonly used in a variety of Toyota and Lexus models.
1. **Genuine Toyota Part:** Specifically engineered for Toyota vehicles to meet factory standards.
2. **High Filtration Efficiency:** Captures dirt, debris, and microscopic contaminants effectively.
3. **Durable Construction:** Built to withstand high oil pressures and extreme operating conditions.
4. **Anti-Drain Back Valve:** Prevents oil from draining out of the filter when the engine is off, ensuring faster lubrication during startups.
5. **Easy Installation:** Designed for straightforward replacement in compatible Toyota vehicles.
- **Part Number:** 90915-YZZE1
- **Filter Type:** Spin-on oil filter
- **Thread Size:** M20 x 1.5
- **Seal Diameter:** ~65 mm (varies slightly depending on the batch)
- **Height:** Compact design for Toyota engines.
- **Media Material:** High-quality synthetic or blended media for enhanced filtration.
- **Compatibility:** Works with Toyota vehicles with specific engine sizes, such as 1.5L, 1.8L, 2.0L, and 2.5L, among others.
This oil filter is compatible with a wide range of Toyota and Lexus models, including:
- **Toyota Cars:** Corolla, Camry, Yaris, Prius, Avensis, and more.
- **Toyota SUVs/Trucks:** RAV4, Highlander, Tacoma, Hilux, and others.
- **Lexus Models:** Certain Lexus models with engines compatible with this filter.
Always refer to your vehicle''s owner''s manual or consult a dealer to confirm compatibility.
1. **Prepare the Tools:**
- New oil filter (90915-YZZE1)
- Correct grade of engine oil (refer to your owner''s manual)
- Filter wrench, drain pan, and clean cloths.
- Remove the oil drain plug and let the old oil drain into a pan.
- Replace the drain plug once the oil has fully drained.
3. **Remove Old Oil Filter:**
- Use a filter wrench to unscrew the old oil filter.
- Be prepared for some oil spillage.
4. **Prepare New Filter:**
- Apply a thin layer of fresh oil to the new filter''s gasket to ensure a good seal.
5. **Install the New Filter:**
- Screw on the new filter by hand until snug, then tighten an additional ¾ turn. Do not overtighten.
6. **Refill Engine Oil:**
- Pour the recommended amount and grade of oil into the engine.
- Check for leaks around the filter and drain plug.
- After starting the engine and letting it run briefly, check the oil level and top off if needed.
- **Replace Regularly:** Replace the oil filter with every oil change (usually every 5,000–10,000 km or as specified in your manual).
- **Use Genuine Parts:** Genuine filters like the 90915-