Product description
1. Advanced MPPT maxpowerpoint tracking technology, tracking efficiency exceeds 99.5%.
2. LCD screen design, dynamically display equipment operation data and operation status.
3. Compatible with Seal, GEL, Flood, LifePO4 battery charging
4. Dual USB 5V charging ports
5. 12V/24V/36V/48V automatic identification
6. Overvoltage protection
7. Overcurrent protection
8. Temperature protection
9. 7 working modes to choose from
[7 working modes to choose from]
1. Charging mode: Do not discharge under any circumstances.
2. Lighting control mode: When the controller detects nighttime, there will be a 10-minute delay to start discharging. When daylight is detected, there will be a 10-minute delay and stop discharging.
3. Lighting and delay control mode: When the controller detects nighttime, there will be a 10-minute delay and the discharge starts counting down. The timer stops discharging when it reaches 0, with a maximum delay of 23:59.
4. Control mode: Keep discharging without failure.
5. Manual control mode: Whether to use "▼" to discharge.
6. Timing control mode: Timed discharge on and off.
7. Test mode: Same as lighting delay control mode, only 10 minutes less delay.
8. The controller still discharges under low voltage protection. Touch "▼" for 5 seconds to continue discharging output, but the discharge can only be stopped manually. Be careful that this function may damage the battery!
Product name: Solar controller
1*Solar controller(70A,80A, 90A Optional)
1. Due to many factors such as display brightness, light brightness, etc., the actual color of the product may be slightly different from the picture shown on the website.
2. The data may have slight manual measurement deviation.