WF102B Woodworking PVC/ABSPortable Edge Banding Machine,StraightAnd Arc Shape Curve Edge Bander [Free1KG Hot Melt Glue]

Model:WF102B Brand： Total power:1200W Voltage:220V 50-60hz Glue pot:1000ml Type :double glue cover Edge Banding Machine Min diameter of the arc edge: 45mm Feed speed: 0.5-5m/min (adjustable) Edge band thickness:0.3-3.0mm Edge band width:10-50mm Work tempetature:150-180℃ Suitable glue: EVA medium temperature hot melt glue at 150-180℃（You can find it in our store） Warranty period:1 year. Packing list: main machine*1set; workbench*1set; hanging board*1set; installation tool*1set; spare fuse*1set.

Operation points 1. Start the machine and heat the temperature to the preset 150-180 degrees. 2. Turn on the handle switch and adjust the gluing speed to more than 40%. 3. Feed in the edge band, test the amount of glue applied, and it is best if the amount of glue applied to the edge band is evenly filled with the edge band and will not overflow. 4. How to adjust the amount of glue: a. First, adjust the thickness of the edge band press plate(on the front of the machine), so that the gap between the edge band press plate and the gluing wheel is about the thickness of the edge band, and test the amount of glue again. b. If the glue amount is still not ideal, then adjust the glue amount adjustment knob of the edge band （on the left side of the machine）, and then test the glue amount，Repeat the above operation until it reaches the ideal glue amount. 5、Set the width limiter for the inlet and outlet of the edge band to ensure that the edge band can enter the machine smoothly and does not shake up and down. 6. Feed the edge banding, push the board at the same time, and carry out edge banding. The board should be tightly attached to the edge banding to ensure a good sticking firmness. 7. Use other tools (manual trimmer, router, etc.) for trimming and end cutting.