About this product
Warranty TypeSupplier Warranty
Product description
- Input signal : 0~190ohm
- Working Voltage : 9~32V
-Material:Plastic,Rubber,Metal
- Install diameter: Φ52mm (2")
-Working Voltage: 9-32V(12V/24V)
- Warning light : When the fuel level is lower than 13%, the warning light will flash~
- Resolution range: 21 mm
- Assembly: SAE standard 5 holes
- Rated current for alarm switch: 500mA
- Operating temperatures: - 40 to 85 Celsius
- Fit for Fuel Level Gauge and Water Level Gauge
-Sensor length: 100mm ~ 1500mm
- Mounting: 5 pieces of M5 screws and 2 mm thick gasket
- Output signal: 0~190 ohm (Standard European),
The correct connection method is:
- The yellow wire of the meter does not need to be connected (if your sensor signal is 0~190ohm)
- The black wire of the meter is connected to the negative pole of the power supply,
- The red wire of the instrument is connected to the positive pole of the power supply,
- Connect the blue wire of the meter to the brown wire of the sensor,
- The blue wire of the sensor is connected to the negative pole of the power supply
100mm, 150mm, 200mm, 250mm, 300 mm ,350 mm ,400mm, 450 mm,500mm, 550mm, 600mm, 650mm, and so on
0~190 ohm (Standard European), 240~33 ohm (Standard American) and so on
The length and output signal of the sensor can be customized, if you need other sizes or output signal, please contact us at any time, we can customize any size for you~~