E-Bike Scooter Brushless DC Motor Controller 36/48V 350W 48/64V 500W 1500W Electric Bicycle Ebike

Brand New

Electric Bicycle Controller

Rated Power: 350 Watts/500 Watts/1500 Watts

350W Rated Voltage: 36/48 Volts 500W/1500W Rated Voltage: 48/64 Volts

Phase Angle: Self-Study

Throttle Voltage: 1.1-4.2V

Brake Level: Low/High

Rated Current: 18A/30A/45A

Matching Motor: Brushless Motor

Material: Alloy

Phase Angle: 60/120 Degrees

350W Size: 10.5*7*3.5cm 500W Size: 15*8*4cm 1500W Size: 23*8*4cm

350W Under-Voltage Protection: 31V/41V 500W/1500W Under-Voltage Protection: 41V/52V

Function: Cruise Function, Three Speed Shift, EABS Brake, Reversing Function, Anti-Flying Car Function, etc.

Feature:

1. Noise reduction function: In view of the shortcomings of brushless motor pulsating current, the noise and vibration in the starting process are reduced to the minimum.

2. Soft start: Safe start, and increase the starting torque to make the start more stable.

3. Speed limiting astern function: Speed regulation at limited low speed during astern to ensure the safety of astern.

4. Three-stage hierarchical speed regulation: Cooperate with the speed regulating turn to make the speed regulating more convenient and safe.

5. Undervoltage protection: When the battery voltage decreases to the set voltage, the output will be stopped automatically to avoid the failure of the battery pack due to overdischarge.

6. Overcurrent protection: When the output current exceeds the set value, the output will be automatically stopped, which can protect the motor and battery pack from the impact of high current.

7. Power brake: EABS+ mechanical brake, high and low level.

8. Flexible EABS Brake: Greatly increase the safety and reliability of the vehicle brake hit, complete. Achieve the brake quiet, soft effect; Reduces the impact on the motor without damaging the motor: reduces the brake silence.

9. Blocking function: When the motor is blocked, the controller will automatically limit the current, and automatically cut off the loop after 3 seconds of blocking, which really protects the motor and controller and prevents accidental burning.

10. Speed limit and current limit function: The exercise speed is controlled within the set speed range.

11. Anti-flying car function: Solve the flying car phenomenon caused by poor speed regulation or line fault. At the same time, the anti-flying car function is activated to improve the safety of the system.

12. MOS tube short circuit protection: When powered on, automatic detection of MOS tube short circuit fault, to prevent the cause of serial short circuit, damage to other MOS tubes.