4S 1.2A balance lithium battery active equalizer balancer energy transfer

is based on the principle of adjacent equalization and cannot be used as a maintenance tool. To connect to the battery, it must be used together with lithium battery protection. The voltage difference generated by

charging and discharging triggers the work of the equalization board to

achieve energy transfer and balance. Lithium Battery Active Balance Energy Transfer Board Lithium Battery Active Balancer Rate Energy Transfer Balance

Inductive energy transfer balance board, high current 1.2A energy transfer

battery voltage balancer, significantly balance the battery voltage and

improve the overall efficiency of the battery pack! Balance Instructions:

1. When the equalization light is on, the equalization work is turned on,

2. The equalization light is off, the equalization circuit is in sleep state,

3. The equalization light flashes, indicating that the string is dropped, or the circuit is faulty.

Equilibrium principle:

This module is the balance of adjacent voltage difference, the voltage

difference between adjacent batteries reaches 0.1V or more, and the chip will trigger the balance work, until the voltage difference between

adjacent batteries is within 0.03V and stop working. When it is used on

the battery pack, there is adjacent voltage difference when charging and discharging. Triggering the equalization work, the battery pack voltage error will also be pulled back to an value, reducing battery

maintenance costs.

Technical parameter:

Working voltage: 2.0V-4.5V, ternary iron lithium battery is common, LTO lithium titanate battery is not suitable.

Balance current:

The adjacent voltage difference is more than 0.1V (the current is about 0.5-0.7A);

The adjacent voltage difference is more than 0.2V (to reach the equilibrium current of 1.2A);

The smaller the voltage difference, the smaller the equalizing current.

Wiring Definition:

B-, the total negative pole of the battery pack (the negative pole of the battery)

B1, the positive pole of the battery

B2, the positive pole of the second battery

B3......and so on.

Accessories:

Wiring line length 30cm pure copper 22awg terminal line!

High-precision energy transfer equalization, balanced IC!

The four-string wiring diagram is as follows, and the other strings are analogous!

Note (The cable with more than 13 strings need to be inserted

obliquely, first contact the B-pin and insert them obliquely upward,

otherwise it may cause the board to burn out)

Packing list: