JFIND JF327 OBD2 ELM327 Scanner Bluetooth 5.1 Clear Fault Code Reader for Yamaha 3 Pin 4 Pin Honda 6 Pin to 16 Pin OBD Car Motor Motorcycle Adapter Extension Cable

Hardware: V1.5

Main control chip: PICI8F25K80

Applicable to all vehicles that comply with OBD-II standards

HOW TO USE JFIND JF327 OF IOS CAR SCANNER?

1.Open "Car Scanner" ,select Settings

2.Click Adapter OBDIl ELM327

3.Choose Bluetooth LE(4.0+)

1. Turn on Bluetooth on your phone and connect to OBDII. The password is 1234 or 0000.

2.Click Settings button Settings.

3.Click OBDII Adapter Settings.

4.Select Bluetooth according to product type.

5.For Bluetooth device. please select“ОBDII“.

6.The car icon appears and stops flashing means connected successfully.

7.Realtime information display.

8.Select display style .

9.Read & clear trouble codes.

Q.What devices does it support?

A.It works with iOS, Android, and Windows devices through Bluetooth. Remember not to pair iPhone and Pad with JFIND JF327 through Bluetooth settings.

Q.Unable to connect to the vehicle (or ECU)

A.Check the compatibility between the vehicle and the app, verify if your vehicle is OBD2 compatible, if the ignition switch is turned on, then try starting the vehicle, and if possible, try another vehicle.

Q.When I tried to connect JFINDJF327 to my iPhone, it told me it doesn't support it.

A.On the I0S device, when you try to connect to the JFIND JF327 device from the iPhone Bluetooth menu, you will see this error. You don't need to connect here. Please restart your iPhone device so that JFIND JF327 appears on Bluetooth again, and then launch the app to connect.

Q.No LED light

A.The adapter is not installed properly. Please remove it from the OBD2 port and plug it back in.

Q.Unable to pair with Android

A1: Turn off Bluetooth and restart it.

A2:(Sometimes several times); Restart the phone and disconnect any other Bluetooth devices on the phone; Clear Bluetooth cache storage: Settings - Applications (Display System) - Bluetooth storage and cache, clear and restart the phone.

Q.Paired with an Android phone, but quickly disconnected.

A.If it only connects for a few seconds and becomes the same device as before, don't worry, usually it is still connected. You just need to launch the application and see if you choose JFIND JF327 as the Bluetooth device to connect.

Q.JFIND JF327 doesn't appear in my phone's Bluetooth device list.

A: If there is no red LED light when inserting, please check the cigar fuse of your vehicle (fuse breakage is usually a problem with the OBD2 connector not having power). You can try to verify on other vehicles.

Q.The app can't connect to the JFIND JF327 device.