Long Bar Table High Dining Table With 2 Seats

1. A manual pipes bender is a simple manual pipes bender of cold bending type.

2. It provides a fast, economical way to produce angled bends in round tubing

3. Comes with 7 molds in different sizes, you can quickly change them according to different needs

4. No heating filling sand, etc. Constructed of sturdy steel material, which is high-strength, high hardness, and not easy to break, the Small bending arc is smooth, clear, deformation.

5. It can bend up to 2mm wall thickness tubing, is easy operation, and is easy to carry.

6. Suitable for wire pipe, circle-steel pipe, low-pressure liquid jointing pipe, etc., and for factories and mines, rural, chemical, refrigeration, buildings, electrical wiring, and plumbing installations, is a commonly used industrial tool.

Model: SWG-25

Material: Cast Iron

Working range: 0-180 °

Elbow range: 10- 25 mm

The outer diameter of mold: 10/12/14/16/19/22/25mm

Pipe wall thickness: 0.8-2.0mm

Weight: 27KG

Packing size: 70*25*21CM (Wooden Package)

A) first fixed base.

B) according to the required bend size to select the mold and roller.

C)when using insert the mold into the shaft on the base, then set the bracket into the axle, then put the wheel in the location section, bolted permanently.

D) transfer bracket to wave plate, bent pipes are inserted between the mold and the roller, adjust the nut, and let mold, tube, and wheel joint. Then turn the handle to start the bending work.

1. Please be careful while using it to avoid injury.

2. Do not put too much force, which may shorten its lifespan.

3. Please place the equipment in positions unreachable for children.

1 x Manual Pipe Bender

7 x Half-circle Bending Molds