6V 12V 10A 3-Stage Solar Charge Controller Regulator for Efficient PWM Battery Charging and Monitoring

1: Equipped with a solar controller to avoid overcharging, over-discharging, short circuit, overload and reverse connection of solar cells, and use the battery discharge rate characteristics for correct discharge control.

2: Using the battery discharge rate characteristics to correct discharge control, this energy controller regulator is a practical tool that can meet your various work needs.

3: This solar controller adopts a series for PWM main charging circuit to effectively improve the charging efficiency, allowing your work to be completed faster and more smoothly.

4: The LED indicator shows the current condition of the battery, allowing customers to understand the battery information so that you can understand the battery condition in time, which is more convenient.

5: The solar panel controller has 3 operating modes, and this solar panel regulator has three operating modes to choose from: normally open mode, pure light control mode, and light control plus timing mode.

Specifications:

Part name: Solar charging controller

Size: As shown

Color: Black

Material: Plastic

Voltage: 6V, 12V

Output current: 10A, 3A

Power range: ≤60W (6V), ≤120W (12V)

Overload and short circuit protection: Yes

No-load loss: ≤5mA

Charging circuit voltage drop: ≤0.2V

Discharging circuit voltage drop: ≤0.1V

Protection level: IP30

Working temperature: -40°~55°

Installation and use:

Determine the output mode of the controller. The device defaults to the normally open mode when it leaves the factory. If you need to set it to pure light control mode or light control plus timing mode, you need to open the shell and change the discharge mode by setting the dip switch

When the button "on" is 1, the button "off" is 0, normally open, pure light control

Connect the battery. If the connection is correct, the battery light will light up

Connect the wires to the solar panel. If the connection is correct, the charging light will light up or flash after 10 seconds in the outdoor sunlight. Otherwise, please check the connection

Make sure the solar panel is placed outdoors in the sun

Connect the load. If connected in reverse, the LED light may be damaged

Please pay attention to the anode and cathode to avoid reverse connection

Package Contents:

1* Automatic Solar Charge Controller

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.