Product description
Dental X-Ray Film is a double-emulsion high speed non-screen X-ray film with fine grain and high contrast.
Super Thin ∑(sigma) - LIC Grain Technology delivers high resolution and fine-grain images.
When shooting, please face the X light source with each piece with small dots. After shooting the dental film, use a syringe to draw 2-3ml of the rinse solution into the dental film bag, pinch it evenly with your hands for 90 seconds, take out the dental film, and use clean water Rinse to finish.
package: 100pcs into 1 box
Developer monobath: 250ml
1.Take dental films according to normal procedures:
2.Extract 3~5mL of rinse solution with a syringe and inject it from the upper right corner of the dental flake bag.
3.Press and hold the pinhole, shake or pinch the tooth tablet bag appropriately with your hand so that the liquid is evenly applied to the film After 60~90s, tear open the dental chip bag and rinse with clean water. (Note: Do not wipe the film plane with your fingers to avoid imaging).
4.Dry the film, it can be used for observation and diagnosis.
1.There is a bump on the corner of the tooth bag that is used to judge the left and right teeth of each person, and the raised floating point surface on the film is represented as the side facing the radiation source.
2.The temperature of the one-time rinse sleeve is about 22°, the temperature is too high, the image is black, it is easy to produce gray fog, and the image is light when the temperature is too low. Users can according to The situation adjusts itself until it becomes clear.
3.Care should be taken when using a syringe to avoid leakage caused by inserting the tooth sheet bag.
4.Yes! Star brand rinse. The rinse sleeve should be sealed after use.
5.Avoid splashing the rinse solution into the eyes, if it is wet, please rinse with clean water immediately.