Car 3D Universal Yellow Color Racing Disc Brake Caliper Covers Large Medium Small

Description:

 

Color: Yellow

 

Specification quantity: As shown in the specification image

 

Please select according to the wheel hub size:

14 inch wheels: front wheel Small, rear wheel Small;

15 inch wheels: front wheel Medium, rear wheel Small;

16 inch wheels: front wheel Medium, rear wheel Small

17 inch wheels: front wheel Medium, rear wheel Medium;

18 inch wheels: front wheel Large, rear wheel Medium;

19 inch and above wheel hubs: front wheel Large, rear wheel Large.

If in doubt, please consult customer service：

 

Size（The measurement method diagram is shown above. Manual measurement may have errors. If you mind, please purchase with caution）:

Large:

Length=27.5cm(10.83 inch) Width=8cm(3.15 inch) Height = 6cm(2.36 inch)

Medium:

Length=24cm(9.45 inch) Width=7cm(2.76 inch) Height = 4.5cm(1.77 inch)

Small:

Length=19.5(7.68 inch) Width=5.5cm(2.17 inch) Height = 4cm(1.57 inch)

 

Attention:

 

Please check the dimension of your brake calipers and confirm whether this item is suitable to your car.

This item don't include the glue, because it cannot be transported, you need to purchase it yourself.

It only can be used in disc brake, not for drum brake.

 

There are silver and gold color screws, and it will be shipped by random, please kindly note and understand, thank you.

 

Please make sure there is more than 1"(2.5cm) clearance space between caliper housing and your wheels.

 

Reference Size: 14" front and rear wheel both with small size, 15"-16" front wheel with medium size, rear wheel with small size. 17" front and rear wheel with medium size. 18" front wheel with big size, rear wheel with medium size. Larger than 19" wheel with big size.

 

100% Brand New

 

Made of ABS thick plastic, light in weight, no melt guaranteed.

 

Reduce brake dust build-up on caliper.

 

Long lasting and heat resistance.

 

The cover is safe and painted with high quality clear coating.

 

Easy-to-install with silicon glue

 

Tested and proven it does not effect the standard cooling of your caliper.

 

Please measure your size before purchase. Models in some countries are different.

 

Installation Guide:

 

1. Remove the wheels and clear the stock caliper housing.

 

2. Apply some silicone glue between caliper cover kit and caliper housing (Use the high Quality Silicone Glue (durable with high temp).

 

3. Attach the caliper cover kit to the caliper housing.

 

4. Move the caliper cover kit to the suitable position and fix it with temporary paper tape.

 

5. Apply High Temp Resistance Silicone Sealer to the outside of your existing Brake Calipers (do not let the glue touch the brake pads) and hold in place for 2-4 hours (example below) while on the vehicle.

 

6. Allow the silicone glue to dry.

 

7. Reattach the wheel and spin the wheel to check the clearance.