Product description
The module is improved, the module itself has been with temperature compensation.
Circuit board 20 * 45 mm module thickness 15mm
1, the module performance is stable, the measurement distance is accurate:
Module high precision, blind (2cm), stable range
2, the main technical parameters:
2) Quiescent current: less than 2mA
4) Level output: Bottom 0V
5) Induction angle: not more than 15 degrees
6) Detection distance: 2cm-450cm
7) high precision: up to 1mm
VCC, trig (control), echo (receive), GND
A control port made a high level of more than 10US, you can wait for a high level output at the receiving port.I can have a timer output timer, when the port goes low can read the value of the timer, this When the distance for the distance, can be calculated from the distance. Such a constant cycle test, you can achieve the value of your mobile measurement ~ ~
(1) using IO trigger range, to at least 10us high signal;
(2) module automatically send 8 40khz square wave, automatically detect whether there is a signal to return;
(3) a signal to return, through the IO output a high level, high time is the duration of ultrasound from the launch to the return time. Test distance = (high time * sound velocity (340M / s)) / 2;
US-100 Ultrasonic Distance Measurement Module
US-100 ultrasonic distance measurement module can achieve 2cm ~ 4.5m non-contact distance measurement function, with 2.4 ~ 5.5V wide voltage input range, static power consumption less than 2mA, comes with temperature sensor to correct the distance measurement results, while With GPIO, serial and other means of communication, with a watchdog, stable and reliable.