TPU Ultralight MTB Bike Inner Tube 26/27.5/29 X1.95-2.8C French Valve 45mm

This inner tube cannot be inflated to a large amount when it is not installed in the outer tire, otherwise it will cause irreversible damage!

Please use a manual inflation pump and do not use high-speed inflation equipment such as air compressors or pumps.

Before inflating a for RideNow tube, turn the valve inward(toward the center of the tire circle). Inflate slightly until the inner tube is rounded; the pressure should be less than 0.5 bar/8 PSI.

When using rims with ringless lip in accordance with ISO/TC 31, the tire inflation pressure must not exceed 5 bar/72PSI.

Tire pressure will increase approximately 1% for every 3°(5°F) increase in temperature.

If you inflate your tires in the morning in a cool garage(18°C/ 65°F) and then ride in a warmer ambient temperature(35°C/ 95°F), this may result in an increase in inner tube pressure(e.g. 0.5 bar/8 PSI).

Especially when riding on hot black asphalt roads with temperatures exceeding 65°C(150°F), tire pressures can easily exceed the maximum allowed. Additionally, excessive tire pressure may cause the tire to come off the rim while riding, resulting in a risk of injury.

If pneumatic tires are stored at temperatures of 60°C(140°F) or higher(such as in a car on a hot day), deflate the inner tube to 1 bar/15 PSI to avoid valve deformation.

Specification:

Product name: for TPU inner tube

Material: for TPU

Size: for French Valve 45mm

Model: Mountain bike 26X2.0-2.8, 27.5X2.0-2.8, 29x1.95-2.8

Weight: about 26(56G)/27.5(58G)/29(62G)

color: blue

.

Package Content：

for TPU inner tube*1

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.