XH-W3001 220V 1500W Incubator Multifunction Digital LED Display Temperature Controller Thermometer
Sold by Zantop Fiber
4(13)
324 sold
Select options
Select
Shipping
From ₱36.00
Est. delivery by Apr 17 - Apr 21
Customer reviews (13)
v**4
Item: AC220V
un ohhh na try kuna sya maganda solit pa
January 31, 2025
J**o
Item: AC220V
Ok namn... order pa sana ako pang3 kona sana kaso walanang stock.
March 8, 2025
V**l
Item: AC220V
Gumagana nmn sya mabilis din syang dumating thank you seller
October 6, 2024
C**y
Item: AC220V
Thanks working na siya
March 5, 2025
J**🇭
Item: AC220V
Order received
November 10, 2024
❤**b k**️
Item: AC220V
Ok sya.
December 12, 2024
J**l R**o
Item: AC220V
Goods
March 1, 2025
@**@
Item: AC220V
Ganda
February 16, 2025
r**0
Item: AC220V
Ok
3w ago
I**n
Item: AC220V
Anu bayan siller kala ko liget pangalawang order kuna to iba ibang siller puro sira nman badtrep
January 6, 2025
.**r
Item: AC220V
January 23, 2025
R**e
Item: AC220V
Ayaw gumana ng down
December 5, 2024
🙇**️
Item: AC220V
Sana ok lng dipa na subukan
Today
Zantop Fiber
127 items
Shop performance
Better than 88% of other shops
Ships within 2 days
90%
Responds within 24 hours
100%
Product description
This thermostat can be used either for heating or cooling devices. It uses a start and stops temperature. To set the temperature, press and hold one of the two buttons until the screen flashes. When pressing and holding the left button you can adjust the relay start-up temperature and the right-hand relay temperature. After setting the temperature, the screen will stabilize and, after a short delay, will display the temperature read by the sensor.
Specifications:
Power: 110-220V AC;
Maximum current: 10A;
Maximum power: 1500W;
Measuring range from -50 C to 110 C;
Control range from -50 C to 110 C;
Accuracy: 0.1 C;
Temperature sensor: NTC10K, 1m long, waterproof;
Sensor sample sizes: 4mm (diameter);
Device dimensions: 60 x 45 x 32mm;
Weight: 53g;
Built of metal.
Instructions for use:
Setting the start and stop temperature of the relay can be done as follows:
Start temperature: Press and hold down the left button (up arrow) until the screen starts blinking. Now, using the two buttons, adjust the temperature at which you want the relay to turn on.
Stop temperature: Hold down the right button (down arrow) until the screen starts blinking. Now, using the two buttons, adjust the temperature at which you want the relay to turn off.
This thermostat can be used for both heating and cooling appliances.
For heating appliances, the starting temperature must be lower than the stop temperature.
For cooling appliances, the starting temperature must be higher than the stop temperature.