1/2pcs 24mm BB Thread Road Mountain Bike Bicycle Fixed Gear Bearing Protection Protection Cap Bottom Bracket Cover

Name: Bottom bearing protection cover

Specifications: Suitable for bearings with an inner diameter of 25MM and crank shafts with an outer diameter of 24MM.

Material: Engineering Plastic

Function: Waterproof and dustproof to improve bearing life

Size:36.5*9.4mm

Quantity:1/2pcs

Description:

Because it is a buckle design, it must be gently pressed into the 70% position during installation, and the rest of the place is gently pressed with a screwdriver or other tools until the buckle is completely inside the bearing, and then it is fully pressed into the bearing. When you hear a click, the installation is successful.

Important reminder: Do not press all the force directly, this will cause damage to the protective cover.

Many riders replace the new bearings and cause the original dust cover to be damaged and cannot be installed. This can be a good replacement. No tools are needed. Manually press it to install it. It is very convenient. After the crank is locked, there will be no loosening. One axis needs two

Packing Include:

1pc or 2pcs Protective Cover

Notice:

1.Transition: 1cm=10mm=0.39inch.

2.Please allow 1-2mm error due to manual measurement and make sure you do not mind before ordering.