Product description
Applicable to the following types of water purifiers
Universal 10-inch filter element with high compatibility, including pre-water purifier, box-type water purifier, kitchen-type reverse osmosis water purifier and multi-stage ultrafiltration water purifier
High-end grooved PP cotton is used to increase the effective filtering area by more than 30% and filter more thoroughly
Three-layer melt-blown, loose outside and dense inside, fully intercepting dirt
The outer layer is loose and the inner layer is dense. Each layer gives full play to its role of dirt, with good filtering effect and long service life
PP cotton is packed with POF film. The cost of POF packaging is high, but it does not contain chlorine
Loose layer: isolate particles above 5 microns, such as rust, sand, etc
Compaction layer: 1~5 microns, eliminating muddy pollutants and long-term dialysis filter element
Dense layer: 1 micron, eliminate static dialysis of pollutants, and extend filter life
Schematic diagram of replacement cycle of PP cotton filter element
Granular carbon/compressed carbon/post carbon adopts domestic and imported high-quality coconut shell activated carbon raw materials, with high adsorption and no residual chlorine
Activated carbon filter element
Pre-particle carbon and compressed carbon absorb residual chlorine, organic matter and colloid to remove odor
Post carbon further absorbs residual chlorine odor and improves taste
Filter element replacement procedure
1. Remove the outer packing bag and label of the filter element
2. Unscrew the filter bottle or membrane housing with a wrench
3. PP cotton and CTO are installed in different directions. The UDF is installed with the washer side up. When installing RO membrane, one end of sealing ring is outward
4. Tighten the filter bottle to complete the installation
*10 inch Universal filter element of water purifier,applicable to most water purifiers
*We have 9 types for you to choose from
1)Type A : PP cotton filter element,5 microns, 125g, surface needling process, three-layer melt-blowing, 252 ± 1mm long, 63mm diameter, 28mm inner diameter,service life: 3~6 months
2)Type B : PP cotton filter element,1 microns, 135g, surface needling process, three-layer melt-blowing,252 ± 1mm long, 63mm diameter, 28mm inner diameter,service life: 3~6 months
3)Type C : UDF filter,mixed granular carbon material, 251 ± 1mm long, 72mm diameter, 28mm inner diameter,service life: 6~9 months
4)Type D : CTO filter,mixed compressed carbon material, length 251 ± 1mm, diameter 72mm, inner diameter 28mm, service life: 6~9 months
5)Type E : UDF filter,coconut shell granular charcoal,Length: 251 ± 1mm, diameter: 72mm, inner diameter: 28mm,service life: 6~9 months
6)Type F : PPF filter,front sedimentation filter element, 160g, service life: 3~6 months
7)Type G : CTO filter,coconut shell compressed carbon, length 251 ± 1mm, diameter 72mm, inner diameter 28mm,service life: 6~9 months
8)Type H : UDF filter,advanced granular activated carbon raw material,Length: 251 ± 1mm, diameter: 68mm, inner diameter: 28mm,service life: 6~9 months
9)Type I : CTO filter,Advanced sintered carbon-carbon raw material,Length: 251 ± 1mm, diameter: 68mm, inner diameter: 28mm,service life: 6~9 months
HR010003-5 , HRO400-5A/5C , HRO5001-5 , HRO5002-5/5WD/5WS/5A/5C , HRO5003-5/5A,HRO5005-56-5/7-5 , HRO5010-5Z , HRO5010A-5E/5Z , HRO5011-5 , HRO5011A-5A/5D,HRO5012-5/A-5 , HRO5015-5(WD)/(WS), HRO7503-5
MYRO101-5,MYR0104-5,MYRO103-5,MYRO102-5
*The service life of the filter element is limited. If it exceeds the service life, it will affect the function of the product. Please replace the filter element every 3~9 months!
10 inch water purifier universal filter element