12V/24V Solar panel regulator PWM Charging controller Battery charger LCD display USB

24 hours delivery

The transit time is approximately 48-72 hours, depending on the arrival time of the passenger

System connection:

1. Connect the battery to the charge regulator - plus or minus.

2. Connect the PV module to the voltage regulator - plus or minus.

3. Connect the consumer to the charge regulator - plus or minus.

3. Apply the reverse order to the uninstallation.

4. Incorrect sequence will damage the controller!

5. The reverse order applies when uninstalling!

6. Incorrect sequence will damage the controller!

7. Full red voltage X2, while using 24V system!

8. This solar controller is not waterproof, please install indoors or in the rain!

Note: This controller is only applicable to all kinds of lead-acid batteries (including openings, seals, gels, etc.), do not use to charge other batteries (including lithium batteries, nickel metal hydride batteries, etc.).

Model: PWM 10-60A

Charging type: PWM

Maximum current: 10-60A

System voltage: 12V/24V/ automatic

Battery type: Lead-acid battery (FLD\GELSLD)

Balance: 14.4V (sealed) 14.2V (gel) 14.6V (floating) Floating charge :13.7V (adjustable under pressure)

Discharge stop: 10.7V (step-down adjustable

Discharge rewiring: 12.6V (adjustable)

Charging and rewiring: 13V USB

Output: 5V/3A

Power consumption:

Operating temperature: -35°C~+60°C

【 Warm reminder 】

Manual measurement will have 1-2cm error, depending on the actual purchased product specifications

When buying a product, it is necessary to understand the product properties to avoid unnecessary losses