Epoxy Resin Set 1Kg (Hardener Included) 3:1 Ratio Jewelry Making Tabletops And Countertops Repairing

High transparency

Self-leveling

Easy to use

Strong and durable

Wide range of applications

 

Product Info:

️Product Name:Epoxy Resin Set

️Product Ingredients:Epoxy Resin

️Size: 1KG (750g:250g)

 

Scope Of Application:

This epoxy resin set can be used for a variety of projects, including:

* Tabletops and countertops

* Artwork and sculptures

* Jewelry making

* Art projects

* Woodworking

* Mold making

* Coating

* Repairing

 

How to use

Epoxy resin is a two-component system consisting of resin and hardener. When mixed together, they form a hard, solid plastic material. Here are the steps you need to follow to use epoxy resin correctly:

1. Safety First:

Always wear appropriate safety gear when working with epoxy resin. This includes gloves, goggles, and a respirator if necessary. Work in a well-ventilated area and avoid skin contact.

2. Prepare Your Work Area:

Cover your work area with a plastic sheet or newspaper to protect it from spills. Have all your tools and materials ready before you start.

3. Measure Properly:

Epoxy resin and hardener must be mixed in the correct ratio, which is usually 1:1, but it can vary depending on the product. Always read and follow the manufacturer's instructions.

4. Mix Thoroughly:

Mix the resin and hardener together thoroughly for a few minutes until they are fully combined. Make sure to scrape the sides and bottom of your mixing container to ensure everything is incorporated, ensuring no streaks remain.

5. Pour Slowly:

Pour the mixed epoxy resin slowly onto your project. This will help to avoid air bubbles.

6. Remove Air Bubbles:

After pouring, you might notice air bubbles in the resin. You can remove these by gently going over the surface with a heat gun or torch.

7. Let it Cure:

Allow the epoxy to cure for at least 12-24 hours at room temperature (70-80°F / 21-27°C)before moving or touching it. Full hardness is typically achieved after 24 hours . The curing time can vary depending on the product and the environmental conditions.

 

Yellowing:

- Store epoxy resin in a cool, dark place to prevent premature yellowing.

- Avoid direct sunlight exposure during the curing process to prevent yellowing.

- If yellowing has already occurred, you may need to remove the cured layer and reapply a new layer of epoxy resin.

Improve curing:

- Ensure the correct resin-to-hardener ratio is used, as recommended by the manufacturer.

- Mix the resin and hardener thoroughly, but avoid introducing excessive air bubbles.

- Avoid using epoxy resin in high humidity conditions, as it may affect curing.

Remove bubbles:

- After pouring the epoxy resin, use a heat gun or propane torch to gently apply heat over the surface, which will help release trapped air bubbles.

- Pop any remaining visible bubbles using a pin or toothpick.