Product description
Made of high quality ABS and metal material, it is solid, durable and good performances, serve you for a long-term.
0.5-6L/minutes, high efficiency, stable performances.
G 1/4" fast connection interfaces, easy to install.
Suitable for water dispenser, water heater and so on.
Water flows sensor only, other accessories demoed in the picture is not included!
Length: approx.3.5x2.8x5.4cm/1.38x1.10x2.13in
Start water flows: Less than 0.20L/minutes
Starting water pressure: Less than 0.1Mpa
Working flows range: 0.5-6L/minutes
Pay attention to clean the air impellers on the residual water when the output signal is not highers than 150HZ, idle for time should be 30 seconds.
Bearing water pressure: up to 0.8Mpa
Operating voltage range: 3.5-12VDC
Operating current: 0.51.5MA
Working environment temperature: 1-100
Applicable environment temperature: –40-100
Output characteristic: (32xQ)Q for traffic L/minutes, Hz (Hz); Error ±3%
Electrical strength: Over 600VAC, Durations of 5S leakage current 3mA
Insulation resistance: Over 100mΩ, The insulation resistance between the connector and the housing body or the valves body.
Please allow 0-1cm error due to manual measurement. please make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1x Water Meter Flows Sensor